Ursus 1122 / 1124 – specifications
Built: 1984–2009 · Series: Other models
The Ursus 1122 / 1124 is a machine built by Ursus. Production: 1984–2009. The engine delivers 119 hp (87.5 kW), has 6 cylinders, with a displacement of 6,842 cm³. Torque is 365 Nm. Rated speed is 2,200 rpm. The machine is 4,490 mm long, 1,985 mm wide and 2,730 mm high. The unladen weight is 4,184 kg. The wheelbase measures 2,695 mm. Ground clearance is 375 mm. Top speed is 25 km/h. Transmission: 16 V/8 R. The engine is water-cooled. Tyres: front 7.50-20 ASF (A: 12.4-24 AS), rear 18.4-38 AS (A: 18.4-34 AS). The fuel is diesel. The bore measures 110 mm. The stroke is 120 mm. The compression ratio is 17:1. Construction: semi-frame construction. Rated output across the Ursus range ranges from 8 to 192.6 hp; the 1122 / 1124 sits in the upper part of that range with 119 hp. Its immediate neighbours are the 1234 below it with 118.6 hp and the 1.201 / 1.204 above it with 121 hp. Rated output across the Ursus range ranges from 5.9 to 141.7 kW; here the 1122 / 1124 sits in the upper part of that range with 87.5 kW. 221 Ursus models across 12 series are on record.
Data for the version built 1984–2009 · Data origin: Reference work (Wikipedia/Wikibooks) · sources
More machines from model year 1984
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ursus — one brand, two licences, many relatives
Anyone looking at an Ursus rarely sees a purely in-house design. The brand's history is a history of licences — and that is precisely why parts are often easier to find than the production figures would suggest.
Read on 4 more paragraphs
In 1965 the Warsaw plant began building the C-4011 under a licence agreement with Zetor in Brno. At its heart sat the S-4001 engine, the Polish version of Zetor's Z-4001. That kinship runs through the ranges: the later C-360, built from 1976 and in the programme until the end of 1994, used the S-4003, the strongest engine of that family.
In 1974 a second licence followed — the British one from Massey Ferguson, together with the associated production plant. Models such as the MF 235, MF 255 and MF 265 were then built in Poland with Perkins engines and became a fixture on many farms. The higher Ursus ranges with four-digit numbers descend from this line.
One remarkable long-runner stands out: the C-325 and its revised versions C-328 and C-330 — popularly the "thirties" — plus the C-335 export version, ran without interruption for 34 years until 1993.
When buying used it is therefore worth establishing the range's ancestry first. An Ursus from the Zetor line shares engine parts with Czech machines, one from the Massey Ferguson line with British ones. That decides where to look for components.
Sources: warzywa.pl, Wiadomości Rolnicze Polska, ursus.info.pl
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 119 hp (87.5 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 365 Nmcorrect |
| Cylinders | 6correct |
| Displacement | 6,842 cm³correct |
| Bore | 110 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 17correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,490 mmcorrect |
|---|---|
| Width | 1,985 mmcorrect |
| Height | 2,730 mmcorrect |
| Wheelbase | 2,695 mmcorrect |
| Ground clearance | 375 mmcorrect |
| Unladen weight | 4,184 kgcorrect |
Drivetrain and chassis
| Drive | rear- and four-wheel drivecorrect |
|---|---|
| Gearbox | 16 V/8 Rcorrect |
| Front tyres | 7.50-20 ASF (A: 12.4-24 AS)correct |
| Rear tyres | 18.4-38 AS (A: 18.4-34 AS)correct |
| Top speed | 25 km/hcorrect |
Origin and approval
| Construction | semi-frame constructioncorrect |
|---|
Frequently asked questions
Where this model stands
Power-to-weight ratio: 20.9 kW/t (88 kW / 4.2 t)
Power class: Large (100–180 hp)
Stronger than 74% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
(FarmAll Technology) 2812
(FarmAll Technology) 3512
(FarmAll Technology) 4512
1.002 / 1.004
1.012 / 1.014
1.201 / 1.204
1.604
1002
1004
1012
1014
1042
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.