Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ursus › C-325 / C-328 / C-330 › C-325

Ursus C-325

Built: 1959-1963 · Series: C-325 / C-328 / C-330

More machines from model year 1959

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the C-325, Ursus offers a model from the C-325 / C-328 / C-330 series. Production: 1959-1963. The engine delivers 25 hp (18.4 kW), has 2 cylinders, with a displacement of 1,810 cm³. Torque is 93 Nm. Rated speed is 2,000 rpm. The machine is 3,030 mm long, 1,680 mm wide and 1,500 mm high. The unladen weight is 1,460 kg. The wheelbase measures 1,840 mm. Ground clearance is 400 mm. Top speed is 20.2 km/h. The tank holds 35 litres. Transmission: 6+2. The engine is water-cooled. Tyres: front 6.00-16 ASF, rear 10-28 AS. The fuel is diesel. The bore measures 98 mm. The stroke is 120 mm. The compression ratio is 16.5:1. Maximum torque is reached at 1,700 rpm. Construction: unit construction (no separate frame). The gearbox offers 6 forward gears. There are also 2 reverse gears. The linkage is category II. Around 26.282 units were built. The C-325 / C-328 / C-330 series covers 3 models and was built 1959-1987. Rated output within it ranges from 25 to 30 hp; the C-325 sits at the bottom of that range with 25 hp. Its immediate neighbours are the C-328 above it with 28 hp. Unladen weight within it ranges from 1,460 to 1,700 kg; here the C-325 sits at the bottom of that range with 1,460 kg. 221 Ursus models across 12 series are on record.

Ursus C-325, C-328, C-330 – small two-cylinder diesels from the Warsaw plant: 18.4 to 22.4 kW, 1,810 to 1,960 cm³ displacement, 1,460 to 1,700 kg unladen weight

Ursus is the long-established Polish tractor maker with its main plant in the Warsaw district of the same name, building agricultural machinery since the 1920s. From the 1960s the C series supplied small, robust two-cylinder diesels for smaller and medium-sized farms in Poland and neighbouring countries; the three-digit number orders the models within the range by power step. This page gathers the closely related types C-325, C-328 and C-330. Until the political transition of 1989, Ursus belonged to Poland's state-owned agricultural machinery combines and supplied other Eastern Bloc states besides the domestic market.

Read on 3 more paragraphs

The register lists 3 versions with 18.4 to 22.4 kW (25 to 30.5 hp) from two-cylinder diesel engines of 1,810 to 1,960 cm³ displacement, torque of 93 to 100 Nm at 2,000 to 2,200 rpm. Unladen weights range from 1,460 to 1,700 kg, lengths from 3,030 to 3,080 mm, widths from 1,590 to 1,680 mm.

In Polish farming, with its many small and medium-sized plots, these Ursus types were standard equipment for decades, robust, easy to repair and widespread well into the years after the transition; similar two-cylinder Ursus types were also exported to other Eastern Bloc countries. The simple, low-maintenance technology allowed repairs even far from authorised workshops, which explains their long service life on Polish farms.

When buying used, what counts is the condition of the injection pump and piston rings of the two-cylinder engine, clutch and brakes, the tightness of the hydraulics, and corrosion on wings and bonnet; parts for this simple mechanism are usually still available through Polish farm machinery dealers.

Sources: SpecCodex register, model data: Ursus C-325 / C-328 / C-330

Technical data

Engine

EngineUrsus S-312, 2 cyl. wysokoprężny, chłodzony cieczącorrect
Fueldieselcorrect
Power25 hp (18.4 kW)correct
Rated speed2,000 rpmcorrect
Torque93 Nmcorrect
Speed at max. torque1,700 rpmcorrect
Cylinders2correct
Displacement1,810 cm³correct
Bore98 mmcorrect
Stroke120 mmcorrect
Compression ratio16.5correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,030 mmcorrect
Width1,680 mmcorrect
Height1,500 mmcorrect
Wheelbase1,840 mmcorrect
Ground clearance400 mmcorrect
Unladen weight1,460 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox6+2correct
Forward gears6correct
Reverse gears2correct
Front tyres6.00-16 ASFcorrect
Rear tyres10-28 AScorrect
Top speed20.2 km/hcorrect

Working data

Fuel tank capacity35 lcorrect
Fuel tank capacity35 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built26,282correct

Other data

Linkage categoryCat IIcorrect

Where this model stands

Power-to-weight ratio: 12.6 kW/t (18 kW / 1.5 t)

Power class: Compact (< 40 hp)

Stronger than 12% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ursus C-325 have?

The Ursus C-325 delivers 25 hp.

How much does the Ursus C-325 weigh?

The unladen weight is 1,460 kg.

What engine does the Ursus C-325 have?

2 cylinders, 1,810 cm³ displacement, Diesel.

How fast does the Ursus C-325 go?

Top speed is 20.2 km/h.

What are the dimensions of the Ursus C-325?

3,030 mm × 1,680 mm × 1,500 mm.

When was the Ursus C-325 built?

Production years: 1959-1963.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 32 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare