Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Tong Yang Moolsan › T603 CAB PS

Tong Yang Moolsan T603 CAB PS 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the T603 CAB PS 4WD, Tong Yang Moolsan offers a model from the Pozostałe modele series. The engine delivers 58.8 hp (43.3 kW), has 4 cylinders, with a displacement of 2,215.5 cm³. Rated speed is 2,600 rpm. The machine is 3,720 mm long. The unladen weight is 2,440 kg. Top speed is 35.6 km/h. Lifting capacity is 1,147 kg. The tank holds 70 litres. The gearbox has 24 forward gears. There are also 24 reverse gears. PTO output is 47 hp. The pump delivers 57.5 l/min. The hydraulic tank holds 42 litres. The cooling system holds 9.1 litres. The oil fill is 6.8 litres. The electrical system runs on 12 V. The engine fitted is the C2,2T. Tyre size: front 12-16,5R4 rear 16,9-24R4. Rated output across the Tong Yang Moolsan range ranges from 23.3 to 100.6 hp; the T603 CAB PS sits in the middle of that range with 58.8 hp. Its immediate neighbours are the T503 NC below it with 51.4 hp and the T903 above it with 90.3 hp. Rated output across the Tong Yang Moolsan range ranges from 17.2 to 74 kW; here the T603 CAB PS sits in the middle of that range with 43.3 kW. 15 Tong Yang Moolsan models across 2 series are on record.

Tong Yang Moolsan – other models: the collective page of South Korean compact tractors outside the named ranges, from the T233HST and T353 to the T603 and T903, 17 to 74 kW, Caterpillar and Mitsubishi engines

This page gathers the Tong Yang Moolsan tractors the register could not assign to a named range – compact and utility tractors of the T range, from the T1003 through the T233HST, T273HST, T353, T433, T503 to the T603 and T903, some with cab (CAB) and some without (NC). Tong Yang Moolsan was a South Korean tractor maker whose programme was later continued under the name TYM; the model designation T with a number gives the range, HST stands for the hydrostatic transmission. The machines are powered by Caterpillar C2.2 diesel engines and by the Mitsubishi S3L2 and S4L2 engines.

Read on 3 more paragraphs

The register lists here 14 versions with 17.2 to 74 kW from three- and four-cylinders of 1,125.8 to 4,398.3 cm³, unladen weights from 920 to 3,685 kg, lift capacities from 500 to 2,490 kg, lengths from 2,740 to 4,110 mm, PTO outputs from 17 to 88 hp and rated speeds from 2,200 to 2,800 rpm.

Tong Yang Moolsan was among the South Korean makers that from the 1980s built compact tractors for export to North America and Europe, where alongside Kubota and Iseki they were positioned as a lower-cost alternative for hobby farms, municipalities and smaller operations.

On used examples of these compact tractors, operating hours, the condition of the hydrostatic or gear transmission, the tightness of the front hydraulics and PTO, and rust on cab and bonnet count; parts run partly through TYM importers, partly through independent farm-machinery dealers.

Sources: SpecCodex register, model data: Tong Yang Moolsan (weitere Modelle)

Technical data

Engine

Engine modelC2.2Tcorrect
Power58.8 hp (43.3 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement2,215.5 cm³correct
Aspirationturbochargedcorrect
Coolant capacity9.1 lcorrect
Engine oil capacity6.8 lcorrect

Dimensions and weights

Length3,720 mmcorrect
Unladen weight2,440 kgcorrect

Drivetrain and chassis

Gearbox typesync/shuttlecorrect
Forward gears24correct
Reverse gears24correct
Tyre sizefront 12-16.5R4 rear 16.9-24R4correct
Top speed35.6 km/hcorrect
Turning radius3,840 mmcorrect

Working data

Lifting capacity1,147 kgcorrect
Pump flow57.5 l/mincorrect
Hydraulic oil capacity42 lcorrect
Fuel tank capacity70 lcorrect

Other data

Cab height2,590.8 mmcorrect
PTO output47 hpcorrect
System voltage12 Vcorrect

More machines with this engine (C2.2T, 5)

Where this model stands

Power-to-weight ratio: 17.7 kW/t (43 kW / 2.4 t)

Power class: Universal (40–100 hp)

Stronger than 41% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Tong Yang Moolsan T603 CAB PS have?

The Tong Yang Moolsan T603 CAB PS delivers 58.8 hp.

How much does the Tong Yang Moolsan T603 CAB PS weigh?

The unladen weight is 2,440 kg.

What engine does the Tong Yang Moolsan T603 CAB PS have?

4 cylinders, 2,216 cm³ displacement.

How fast does the Tong Yang Moolsan T603 CAB PS go?

Top speed is 35.6 km/h.

What is the PTO output of the Tong Yang Moolsan T603 CAB PS?

PTO output is 47 hp.

How much does the rear linkage of the Tong Yang Moolsan T603 CAB PS lift?

The rear linkage lifts 1,147 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare