Tong Yang Moolsan T433 NC 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Tong Yang Moolsan T433 NC belongs to the Tong Yang Moolsan 4WD Tractor series. 43 hp (31.8 kW) is what the four-cylinder engine gets out of 2.2 litres. With a rated speed of 2,600 rpm, it is built for pulling power, not for revving.
At 32 km/h, that is as fast as it goes. Empty, it weighs 1,900 kg.
Within the range, rated power spans from 23.3 to 101 hp; with 43.3 hp, the T433 NC sits in the mid-field. Directly alongside are the T353HST with 35.5 hp below and the T503 CAB with 51.4 hp above.
Technical data
Engine
| Engine model | C2.2correct |
|---|---|
| Power | 43.3 hp (31.8 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 2,215.5 cm³correct |
| Coolant capacity | 8.7 lcorrect |
| Engine oil capacity | 8.3 lcorrect |
Dimensions and weights
| Unladen weight | 1,900 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | sync/shuttlecorrect |
|---|---|
| Forward gears | 16correct |
| Reverse gears | 16correct |
| Tyre size | front 12-16.5R4 rear 17.5L-24R4correct |
| Top speed | 31.7 km/hcorrect |
| System voltage | 12 Vcorrect |
Working data
| Pump flow | 51.1 l/mincorrect |
|---|---|
| Hydraulic oil capacity | 35.2 lcorrect |
| Fuel tank capacity | 60.2 lcorrect |
Other data
| Height | 2,590.8correct |
|---|
Where this model stands
Power-to-weight ratio: 16.7 kW/t (32 kW / 1.9 t)
Power class: Universal (40–100 hp)
Stronger than 29% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Tong Yang Moolsan T433 NC have?
The Tong Yang Moolsan T433 NC delivers 43.3 hp.
How much does the Tong Yang Moolsan T433 NC weigh?
The unladen weight is 1,900 kg.
What engine does the Tong Yang Moolsan T433 NC have?
4 cylinders, 2,216 cm³ displacement.
How fast does the Tong Yang Moolsan T433 NC go?
Top speed is 31.7 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
T1003
T233HST
T273HST
T353
T353HST
T433 CAB
T503 CAB
T503 NC
T603 CAB
T603 CAB PS
T603 NC
T603 NC PS
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.