Terex GS1530 – specifications
Series: Terex Scissor Lift
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Terex GS1530 is an electric scissor lift from the Terex Scissor Lift series. This model belongs to the aerial work platform category and is based on the design of the Genie GS series. The designation follows American convention, where the digits indicate the platform height in feet and the platform width in inches. As an indoor-only lift without additional suffixes, the machine is designed for use on solid, level surfaces.
The empty weight of 1,168 kg and compact external dimensions of 1,830 mm in length and 760 mm in width enable operation in confined indoor spaces. The ground clearance of 60.2 mm requires a smooth floor surface to avoid obstacles. With a maximum speed of 4 km/h and a turning radius of 1,550 mm, the machine can be maneuvered precisely. The solid non-marking tires in size 12x4.5 prevent floor contamination. The platform offers an area of 1,630.2 mm in length and 740.2 mm in width. An extension of 910.1 mm increases the reach. The platform load capacity is 272 kg. The lifting time of 16 s and lowering time of 22 s determine the work cycle. The gradeability of 30% is relevant for indoor ramps. The drive is powered by four batteries with a capacity of 225 Ah at a system voltage of 24 V. The hydraulic oil volume of 14.4 l supplies the lifting system.
In comparison within the series, the GS1530 ranks 21st out of 21 models with specified empty weight. The next larger model is the GS1930 with an empty weight of 1,226 kg. The range of empty weights in the series extends from 1,168 kg to 7,515 kg.
Terex scissor lifts GS1530 to GS5390RT – Genie lifts under the Terex name: the number as platform height in feet and width in inches, RT for rough terrain, DC for electric rough-terrain lifts, 1.2 to 7.5 t
The scissor lifts under the Terex name are Genie designs: since Terex took over the aerial-platform maker Genie of Redmond near Seattle in 2002, the lifts have run worldwide under the Genie brand, but in some markets and rental fleets also with a Terex badge – the GS types in the register are identical to the Genie GS. The type logic follows the American convention: GS stands for Genie Scissor, the first digits give the platform height in feet, the last the platform width in inches – a GS1930 is 19 ft high and 30 in wide, a GS3246 32 ft and 46 in, a GS5390RT 53 ft and 90 in. The suffixes name drive and duty: the models without suffix are the electric indoor lifts, RT the diesel rough-terrain lifts with all-wheel drive, DC the electric rough-terrain lifts with battery drive, AV an equipment variant.
Read on 3 more paragraphs
The register lists 21 versions with service weights from 1,168 to 7,515 kg, lengths from 1,830 to 4,880 mm and widths from 760 to 2,362 mm; the rough-terrain lifts deliver 18.5 to 55.9 kW with Kubota diesels and Ford DSG-423 petrol engines, the indoor lifts run on battery.
The GS1930 – 760 mm wide, 5.8 m platform height – is, together with the JLG 1930ES, the most-hired work platform in the world; the GS5390RT with 16 m platform height is the site lift for façades and hall roofs.
On used lifts, operating hours, battery condition on electric models, play in scissor pins and rails, hydraulic tightness, the function of tilt and overload sensors and a valid periodic inspection count; parts run through the Genie network.
Sources: SpecCodex register, model data: Terex Scherenbühnen, Genie (Terex, Hersteller)
Technical data
Dimensions and weights
| Length | 1,830 mmcorrect |
|---|---|
| Width | 760 mmcorrect |
| Ground clearance | 60.2 mmcorrect |
| Unladen weight | 1,168 kgcorrect |
| Platform length | 1,630.2 mmcorrect |
| Platform width | 740.2 mmcorrect |
Drivetrain and chassis
| Tyre size | 12x4.5correct |
|---|---|
| Tyre type | Solid non-markingcorrect |
| Top speed | 4 km/hcorrect |
| Turning radius | 1,550 mmcorrect |
Working data
| Hydraulic oil capacity | 14.4 lcorrect |
|---|---|
| Lift time | 16 scorrect |
| Lowering time | 22 scorrect |
| Platform extension | 910.1 mmcorrect |
| Platform capacity | 272 kgcorrect |
| Gradeability | 30 %correct |
Electrical data
| Battery capacity | 225 Ahcorrect |
|---|---|
| Number of batteries | 4correct |
Other data
| System voltage | 24 Vcorrect |
|---|
Frequently asked questions
How much does the Terex GS1530 weigh?
The unladen weight is 1,168 kg.
What are the dimensions of the Terex GS1530?
1,830 mm × 760 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Telescopic platform in 3D section
Turn the model, look inside and click an assembly — each one is explained.