Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Someca › SOM-45

Someca SOM-45

Built: 1961–1963 · Series: SOM-Reihe

More machines from model year 1961

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SOM-45 from Someca is part of the SOM-Reihe series. Production: 1961–1963. The engine delivers 45 hp (33.1 kW), has 4 cylinders, with a displacement of 4,156 cm³. Rated speed is 1,600 rpm. The machine is 3,365 mm long, 1,745 mm wide and 1,829 mm high. The unladen weight is 2,492 kg. The wheelbase measures 2,032 mm. Ground clearance is 364 mm. Top speed is 22 km/h. The tank holds 56 litres. Transmission: 7 V/2 R. The engine is water-cooled. Tyres: front 6.00-19 ASF, rear 14-28 AS. The fuel is diesel. The bore measures 105 mm. The stroke is 120 mm. The compression ratio is 15.5:1. Construction: frame construction. The gearbox offers 7 forward gears. There are also 2 reverse gears. Injection pressure is 172 bar. The linkage is category II. The SOM-Reihe series covers 26 models. Rated output within it ranges from 2 to 62 hp; the SOM-45 sits in the upper part of that range with 45 hp. Its immediate neighbours are the SOM-481/T below it with 41 hp and the SOM-50 above it with 50 hp. Unladen weight within it ranges from 930 to 4,500 kg; here the SOM-45 sits in the middle of that range with 2,492 kg. 92 Someca models across 8 series are on record.

Someca SOM: the first own-design tractors from Saint-Ouen, from the BISOMTRAC to the SOM-40 B, 14.7 to 45.6 kW, two- and four-cylinder engines with water cooling

Someca (Société de Mécanique de la Seine) was founded in 1953 as an offshoot of carmaker Simca, which took over the farm machinery division of the firm MAP. Someca's first tractor, the DA 50, was still closely based on MAP's DR3 model; the SOM series covers the independent designs that followed, up to the switch to Fiat technology in 1965.

Read on 4 more paragraphs

The register lists 26 live models, from the BISOMTRAC through the SOM-25 to the SOM-40 B, built between 1957 and 1965. Output ranges from 14.7 to 45.6 kW, weight from 930 to 4,500 kg, displacement from 1,135 to 4,397 cm3 across two- and four-cylinder engines.

The series' commercial high point was the SOM 40, launched in 1957: it became one of the most widely built French tractors of its era and helped give Someca a strong market position, before Fiat, as majority shareholder, took over model development with the Series 15 from 1965.

Anyone looking at a SOM-series tractor is looking at Someca's last purely French design generation before full Fiat-licensed production.

Alongside the predominantly diesel engines, the register also lists petrol engines on individual SOM models, not unusual in post-war France when diesel fuel was not reliably available everywhere. On a petrol model, servicing differs fundamentally from the diesel versions: a carburettor and ignition system instead of an injection pump and glow-plug system, which steers the parts search in a different direction when buying used.

Sources: SpecCodex register, model data: Someca SOM-Reihe

Technical data

Engine

Fueldieselcorrect
Power45 hp (33.1 kW)correct
Rated speed1,600 rpmcorrect
Cylinders4correct
Displacement4,156 cm³correct
Bore105 mmcorrect
Stroke120 mmcorrect
Compression ratio15.5correct
Injection pressure172 barcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,365 mmcorrect
Width1,745 mmcorrect
Height1,829 mmcorrect
Wheelbase2,032 mmcorrect
Ground clearance364 mmcorrect
Unladen weight2,492 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox7 V/2 Rcorrect
Forward gears7correct
Reverse gears2correct
Front tyres6.00-19 ASFcorrect
Rear tyres14-28 AScorrect
Top speed22 km/hcorrect

Working data

Fuel tank capacity56 lcorrect

Origin and approval

Constructionframe constructioncorrect

Other data

Linkage categoryCat IIcorrect

Where this model stands

Power-to-weight ratio: 13.3 kW/t (33 kW / 2.5 t)

Power class: Universal (40–100 hp)

Stronger than 29% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Someca SOM-45 have?

The Someca SOM-45 delivers 45 hp.

How much does the Someca SOM-45 weigh?

The unladen weight is 2,492 kg.

What engine does the Someca SOM-45 have?

4 cylinders, 4,156 cm³ displacement, Diesel.

How fast does the Someca SOM-45 go?

Top speed is 22 km/h.

What are the dimensions of the Someca SOM-45?

3,365 mm × 1,745 mm × 1,829 mm.

When was the Someca SOM-45 built?

Production years: 1961–1963.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 28 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare