Technical register for agricultural, construction and commercial machinery · sourced data

Skyjack SJIII 3215 – specifications

Series: Skyjack Scissor Lift

Build year not documented · Data origin: Directory data · sources

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SJIII 3215 is an electric scissor lift from the third generation of Skyjack’s SJIII series. The Canadian manufacturer positions this model as a compact aerial work platform for indoor use and the rental market. The model designation follows North American conventions, where the first digits indicate the platform width in inches and the last digits indicate the lift height in feet. As part of the electric indoor lift series, the vehicle forgoes a diesel drive and instead uses a 24-volt electrical system for operation.

Technically, the machine is designed for small dimensions and high maneuverability. With a width of 810 mm and a length of 1,780 mm, it fits through narrow doors and into elevators. The empty weight of 1,089 kg allows transport in smaller vans without the need for heavy trucks. The platform offers an area 1,630.2 mm long and 660.1 mm wide, which can be extended by a slide-out section of 910.1 mm. The lifting capacity is 272 kg, which is sufficient for one operator with tools and materials. The speed of 3.2 km/h and the turning radius of 1,680 mm facilitate maneuvering in confined warehouses. The gradeability of 30% allows for overcoming ramps, while the 12 x 4 x 8 solid tires are puncture-proof.

Within the series, the SJIII 3215 occupies the position of the lightest model. It ranks 20th out of 20 recorded models in terms of empty weight. The next larger model, the SJIII 3219, weighs 1,170 kg and thus offers higher stability with similar dimensions. The entire series spans a weight range from 1,089 kg to 6,895 kg. This classification clarifies that the SJIII 3215 is designed as a base model for light-duty applications where low weight and compact dimensions are the primary focus.

Skyjack scissor lifts SJIII 3215 to SJ9250 RT – from Guelph, Ontario: the number as platform width in inches and height in feet, SJIII for the electric indoor lifts, RT for rough terrain, 1.1 to 6.9 t

Skyjack of Guelph, Ontario, is the Canadian maker that has served the rental market with simply designed scissor lifts since 1985 – owned since 2002 by the automotive supplier Linamar and today, alongside JLG and Genie, North America's third big brand. The type logic follows the American convention but in reverse order: the first digits give the platform width in inches, the last the platform height in feet – an SJIII 3219 is 32 in wide and lifts to 19 ft, an SJIII 4632 46 in and 32 ft, an SJ6832 RT 68 in and 32 ft, an SJ9250 RT 92 in and 50 ft. SJIII marks the third generation of the electric indoor lifts, RT the diesel rough-terrain lifts with all-wheel drive, RTE the electric rough-terrain version; the SJ7127 and SJ7135 are the intermediate class of 71 inch width.

Read on 3 more paragraphs

The register lists 20 versions with service weights from 1,089 to 6,895 kg, lengths from 1,780 to 4,470 mm, widths from 800 to 2,340 mm and platform capacities from 227 to 907 kg; the rough-terrain lifts deliver up to 48.5 kW, the indoor lifts run on battery, six register models on LPG.

Skyjack's argument is simplicity: relay-based electrics instead of electronics, colour-coded wiring and a hydraulic system without proportional valves – features rental firms value because technicians repair the lifts without a diagnostic tool.

On used lifts, operating hours, battery condition on SJIII models, play in scissor pins and rails, hydraulic tightness, the function of tilt and overload sensors and a valid periodic inspection are what count.

Sources: SpecCodex register, model data: Skyjack Scherenbühnen, Skyjack (Linamar, Hersteller)

Technical data

Dimensions and weights

Length1,780 mmcorrect
Width810 mmcorrect
Ground clearance60.5 mmcorrect
Unladen weight1,089 kgcorrect
Platform length1,630.2 mmcorrect
Platform width660.1 mmcorrect

Drivetrain and chassis

Tyre size12 x 4 x 8correct
Tyre typeSolid, N/Mcorrect
Top speed3.2 km/hcorrect
Turning radius1,680 mmcorrect

Working data

Lifting capacity272 kgcorrect
Lift time23 scorrect
Lowering time24 scorrect
Platform extension910.1 mmcorrect
Platform capacity272 kgcorrect
Gradeability30 %correct

Other data

System voltage24 Vcorrect

Frequently asked questions

How much does the Skyjack SJIII 3215 weigh?

The unladen weight of the Skyjack SJIII 3215 is 1,089 kg.

What are the dimensions of the Skyjack SJIII 3215?

Dimensions of the Skyjack SJIII 3215: length 1,780 mm, width 810 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​‍‍​​⁠‍‍⁠​​⁠​‍​​‌‌‍⁠

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks

Telescopic platform in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare