Technical register for agricultural, construction and commercial machinery · sourced data
Start › Aerial work platforms › Skyjack › SJ6832 RT

Skyjack SJ6832 RT

Series: Skyjack Scissor Lift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Skyjack SJ6832 RT belongs to the Skyjack Scissor Lift series. The engine delivers 4.8 hp (3.5 kW). The unladen weight is 3,475 kg. The wheelbase measures 2,042.2 mm. Ground clearance is 200.2 mm. Top speed is 6.1 km/h. The fuel is Gas/propane. Tyre size: 26 x 12. The Skyjack Scissor Lift series covers 20 models. Rated output within it ranges from 2.2 to 48.5 kW; the SJ6832 RT sits at the bottom of that range with 3.5 kW. Its immediate neighbours are the SJ6832 RTE below it with 2.2 kW and the SJ7127 above it with 23.1 kW. Unladen weight within it ranges from 2,903 to 5,321 kg; here the SJ6832 RT sits in the lower part of that range with 3,475 kg. 58 Skyjack models across 7 series are on record.

Skyjack scissor lifts SJIII 3215 to SJ9250 RT – from Guelph, Ontario: the number as platform width in inches and height in feet, SJIII for the electric indoor lifts, RT for rough terrain, 1.1 to 6.9 t

Skyjack of Guelph, Ontario, is the Canadian maker that has served the rental market with simply designed scissor lifts since 1985 – owned since 2002 by the automotive supplier Linamar and today, alongside JLG and Genie, North America's third big brand. The type logic follows the American convention but in reverse order: the first digits give the platform width in inches, the last the platform height in feet – an SJIII 3219 is 32 in wide and lifts to 19 ft, an SJIII 4632 46 in and 32 ft, an SJ6832 RT 68 in and 32 ft, an SJ9250 RT 92 in and 50 ft. SJIII marks the third generation of the electric indoor lifts, RT the diesel rough-terrain lifts with all-wheel drive, RTE the electric rough-terrain version; the SJ7127 and SJ7135 are the intermediate class of 71 inch width.

Read on 3 more paragraphs

The register lists 20 versions with service weights from 1,089 to 6,895 kg, lengths from 1,780 to 4,470 mm, widths from 800 to 2,340 mm and platform capacities from 227 to 907 kg; the rough-terrain lifts deliver up to 48.5 kW, the indoor lifts run on battery, six register models on LPG.

Skyjack's argument is simplicity: relay-based electrics instead of electronics, colour-coded wiring and a hydraulic system without proportional valves – features rental firms value because technicians repair the lifts without a diagnostic tool.

On used lifts, operating hours, battery condition on SJIII models, play in scissor pins and rails, hydraulic tightness, the function of tilt and overload sensors and a valid periodic inspection are what count.

Sources: Kennwerte der Modelle Skyjack Scherenbühnen, Skyjack (Linamar, Hersteller)

Technical data

Engine

FuelGas/propanecorrect
Power4.8 hp (3.5 kW)correct

Dimensions and weights

Length2,720.1correct
Width1,761.7correct
Wheelbase2,042.2correct
Ground clearance200.2correct
Unladen weight3,475 kgcorrect

Drivetrain and chassis

Tyre size26 x 12correct
Top speed6.1 km/hcorrect
Turning radius3,960 mmcorrect

Where this model stands

Power-to-weight ratio: 1 kW/t (4 kW / 3.5 t)

Stronger than 3% of the aerial work platforms in the register — out of 205 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Skyjack SJ6832 RT have?

The Skyjack SJ6832 RT delivers 3.5 kW.

How much does the Skyjack SJ6832 RT weigh?

The unladen weight is 3,475 kg.

How fast does the Skyjack SJ6832 RT go?

Top speed is 6.1 km/h.

What are the dimensions of the Skyjack SJ6832 RT?

2,720 mm × 1,762 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telescopic platform in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare