Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Schlüter › Compact 1050 TV

Schlüter Compact 1050 TV

Built: 4/1978–10/1981 · Series: Compact-Baureihe

More machines from model year 1978

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Compact series from Schlüter includes the Compact 1050 TV. Production: 4/1978–10/1981. The engine delivers 100 hp (74 kW), has 4 cylinders, with a displacement of 4,752 cm³. Torque is 432 Nm. Rated speed is 1,800 rpm. The machine is 3,950 mm long, 2,100 mm wide and 2,600 mm high. The unladen weight is 4,600 kg. The wheelbase measures 2,346 mm. Ground clearance is 420 mm. Top speed is 35.5 km/h. The tank holds 156 litres. Transmission: 12V / 6R. The engine is water-cooled. Tyres: front 11.2-24, rear 16.9-34. The fuel is diesel. The bore measures 110 mm. The stroke is 125 mm. Injection pressure is 200 bar. The linkage is category II. Around 99 units were built. The Compact-Baureihe series covers 11 models. Rated output within it ranges from 58 to 130 hp; the Compact 1050 TV sits in the middle of that range with 100 hp. Its immediate neighbours are the Schlüter Compact 950T (TV) below it with 95 hp and the Compact 1150 V6/TV6 above it with 110 hp. Unladen weight within it ranges from 2,690 to 5,200 kg; here the Compact 1050 TV sits in the upper part of that range with 4,600 kg. 91 Schlüter models across 19 series are on record.

Schlüter Compact series (1978–1993) – the compact Freising tractors below the Super: Compact 550 to 1350, the number as hp, V for four-wheel drive, T for turbo, LS for powershift, 43 to 95 kW

The Compact series was Schlüter's answer to the criticism that the Freising tractors were too big and too heavy: from 1978 the maker built, alongside the Super large tractors, a more compact range with shorter wheelbase and lower height for the family farm, which ran until the end of production in 1993. The type logic follows the Schlüter system: the number gives the output in hp – Compact 550 about 55 hp, Compact 950 about 95 hp, Compact 1350 about 135 hp – V stands for four-wheel drive, V4 and V6 additionally give the cylinder count, T for turbocharger, LS for the version with powershift transmission, Special for special equipment; the Super 800 V is a transitional type from the older range. As with all Schlüters the engines came from in-house production, three- to six-cylinders of 3.4 to 5.9 litres.

Read on 3 more paragraphs

The register lists 11 versions with 42.5 to 95 kW (70 to 100 hp where output is recorded), 3,435 to 5,867 cm³ with three to six cylinders, rated speeds of 1,800 to 2,200 rpm, torque from 235 to 530 Nm, unladen weights from 2,690 to 5,200 kg, lengths from 3,510 to 4,220 mm, widths from 1,710 to 2,360 mm and heights from 2,220 to 2,775 mm – all diesel.

The Compacts shared engines and cabs with the Supers and were nevertheless a design of their own – Schlüter's attempt to hold its ground in the mid-range with small volumes against Fendt and Deutz, which failed in 1993 with the end of the brand.

Used Compacts are rarer than Supers and sought after by collectors; when buying, engine and transmission, the powershift on LS models, front axle and hydraulics and parts supply through Schlüter specialists are what count.

Sources: SpecCodex register, model data: Schlüter Compact-Baureihe, Schlüter (Traktorenhersteller) (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power100 hp (74 kW)correct
Rated speed1,800 rpmcorrect
Torque432 Nmcorrect
Cylinders4correct
Displacement4,752 cm³correct
Bore110 mmcorrect
Stroke125 mmcorrect
Injection pressure200 barcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,950 mmcorrect
Width2,100 mmcorrect
Height2,600 mmcorrect
Wheelbase2,346 mmcorrect
Ground clearance420 mmcorrect
Unladen weight4,600 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox12V / 6Rcorrect
Front tyres11.2-24correct
Rear tyres16.9-34correct
Top speed35.5 km/hcorrect

Working data

Fuel tank capacity156 lcorrect

Origin and approval

Units built99correct

Other data

Linkage categoryCat IIcorrect

Where this model stands

Power-to-weight ratio: 16.1 kW/t (74 kW / 4.6 t)

Power class: Universal (40–100 hp)

Stronger than 66% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Schlüter Compact 1050 TV have?

The Schlüter Compact 1050 TV delivers 100 hp.

How much does the Schlüter Compact 1050 TV weigh?

The unladen weight is 4,600 kg.

What engine does the Schlüter Compact 1050 TV have?

4 cylinders, 4,752 cm³ displacement, Diesel.

How fast does the Schlüter Compact 1050 TV go?

Top speed is 35.5 km/h.

What are the dimensions of the Schlüter Compact 1050 TV?

3,950 mm × 2,100 mm × 2,600 mm.

When was the Schlüter Compact 1050 TV built?

Production years: 4/1978–10/1981.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare