Scania TH 4X2 ZS 65100
Built: 1984-1989 · Series: TH
More machines from model year 1984
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania TH – heavy trucks on 4x2 and 6x2 chassis: six- to eight-cylinder engines, 7.8 to 11 litres of displacement, gross weights from 17.5 to 27 tonnes
The TH range covers heavy Scania trucks from the maker based in Södertälje near Stockholm, which has ranked among the leading brands of European long-haul and heavy transport since the 1970s. The models are identified by the chassis codes 4X2 and 6X2 for two- and three-axle versions, supplemented by the suffixes Z, ZL and ZS marking different chassis variants within the range. They are powered by Scania's own in-line engines, built with six or eight cylinders depending on the version.
Read on 3 more paragraphs
The register lists 11 versions with six- to eight-cylinder engines of 7,790 to 11,020 cm³, unladen weights from 6,800 to 13,465 kg and gross weights from 17,500 to 27,000 kg. Lengths range from 6,700 to 9,750 mm, widths from 2,450 to 2,530 mm.
Scania traditionally positions itself in the premium segment of long-haul transport, with a high share of standardised components across ranges and decades – a modular build principle that eases servicing and parts supply. The TH chassis with 4x2 and 6x2 drive cover both classic tractor-unit operation and heavier distribution and special tasks, where the third axle adds payload or stability.
When buying used, what matters on trucks of this class is the condition of the in-line engine and the mileage, the state of clutch and gearbox, the frame and suspension, and the brake system and air bellows. On the 6x2 chassis it is worth checking the trailing axle and its steering, and on all models rust on the frame and cab floor; spare parts run through Scania's dense service network.
Sources: SpecCodex register, model data: Scania TH, Scania (manufacturer)
Technical data
Engine
| Cylinders | 8correct |
|---|
Dimensions and weights
| Length | 6,700 mmcorrect |
|---|---|
| Width | 2,530 mmcorrect |
| Wheelbase | 4,200 mmcorrect |
| Unladen weight | 7,310 kgcorrect |
| Gross vehicle weight | 17,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Scania TH 4X2 ZS 65100 weigh?
The unladen weight is 7,310 kg.
What is the gross vehicle weight of the Scania TH 4X2 ZS 65100?
17,500 kg.
What engine does the Scania TH 4X2 ZS 65100 have?
8 cylinders.
What are the dimensions of the Scania TH 4X2 ZS 65100?
6,700 mm × 2,530 mm.
When was the Scania TH 4X2 ZS 65100 built?
Production years: 1984-1989.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
TH 4X2 82P
TH 4X2 Z
TH 4X2 ZL 65100
TH 4X2 ZL 70100
TH 4X2Z
TH 6X2 Z
TH 6X2 ZL 70180
TH 6X2 ZS
TH 6X2 ZS 65180
TH 6X2 ZS 70180
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
