Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania › TH › TH 4X2 82P

Scania TH 4X2 82P – specifications

Built: 1984 · Series: TH

The Scania TH 4X2 82P is a model in the TH series. Production: 1984. The engine has 6 cylinders, with a displacement of 7,790 cm³. The vehicle is 9,010 mm long and 2,500 mm wide. The unladen weight is 8,100 kg. The wheelbase measures 4,600 mm. The gross vehicle weight is 18,000 kg. The vehicle runs on 4 wheels. The TH series covers 11 models. Unladen weight within it ranges from 6,800 to 13,465 kg; the TH 4X2 82P sits in the lower part of that range with 8,100 kg. Its immediate neighbours are the TH 4X2 ZL 70100 below it with 8,000 kg and the TH 6X2 ZS 65180 above it with 8,430 kg. Gross vehicle weight within it ranges from 17,500 to 27,000 kg; here the TH 4X2 82P sits at the bottom of that range with 18,000 kg. 11893 Scania models across 91 series are on record.

Data for the version built 1984 · Data origin: Official register · sources

More machines from model year 1984

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Scania TH – heavy trucks on 4x2 and 6x2 chassis: six- to eight-cylinder engines, 7.8 to 11 litres of displacement, gross weights from 17.5 to 27 tonnes

The TH range covers heavy Scania trucks from the maker based in Södertälje near Stockholm, which has ranked among the leading brands of European long-haul and heavy transport since the 1970s. The models are identified by the chassis codes 4X2 and 6X2 for two- and three-axle versions, supplemented by the suffixes Z, ZL and ZS marking different chassis variants within the range. They are powered by Scania's own in-line engines, built with six or eight cylinders depending on the version.

Read on 3 more paragraphs

The register lists 11 versions with six- to eight-cylinder engines of 7,790 to 11,020 cm³, unladen weights from 6,800 to 13,465 kg and gross weights from 17,500 to 27,000 kg. Lengths range from 6,700 to 9,750 mm, widths from 2,450 to 2,530 mm.

Scania traditionally positions itself in the premium segment of long-haul transport, with a high share of standardised components across ranges and decades – a modular build principle that eases servicing and parts supply. The TH chassis with 4x2 and 6x2 drive cover both classic tractor-unit operation and heavier distribution and special tasks, where the third axle adds payload or stability.

When buying used, what matters on trucks of this class is the condition of the in-line engine and the mileage, the state of clutch and gearbox, the frame and suspension, and the brake system and air bellows. On the 6x2 chassis it is worth checking the trailing axle and its steering, and on all models rust on the frame and cab floor; spare parts run through Scania's dense service network.

Sources: SpecCodex register, model data: Scania TH, Scania (manufacturer)

Technical data

Engine

Cylinders6correct
Displacement7,790 cm³correct

Dimensions and weights

Length9,010 mmcorrect
Width2,500 mmcorrect
Wheelbase4,600 mmcorrect
Unladen weight8,100 kgcorrect
Gross vehicle weight18,000 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Scania TH 4X2 82P weigh?

The unladen weight of the Scania TH 4X2 82P is 8,100 kg.

What is the gross vehicle weight of the Scania TH 4X2 82P?

The gross vehicle weight of the Scania TH 4X2 82P is 18,000 kg.

What engine does the Scania TH 4X2 82P have?

The Scania TH 4X2 82P has 6 cylinders and 7,790 cm³ displacement.

What are the dimensions of the Scania TH 4X2 82P?

Dimensions of the Scania TH 4X2 82P: length 9,010 mm, width 2,500 mm.

When was the Scania TH 4X2 82P built?

The Scania TH 4X2 82P was built in 1984.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​‍​⁠‍‍​​‌​​⁠‌​‌‌⁠⁠‍

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare