Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania › P94 › P94 DB4X2NB 230

Scania P94 DB4X2NB 230

Built: 2004 · Series: P94

More machines from model year 2004

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Scania P94 DB4X2NB 230 is a model in the P94 series. Production: 2004. The engine delivers 169 kW, has 6 cylinders, with a displacement of 8,970 cm³. The vehicle is 7,150 mm long and 2,500 mm wide. The unladen weight is 8,000 kg. The gross vehicle weight is 18,600 kg. The P94 series covers 13 models. Rated output within it ranges from 161 to 209.5 kW; the P94 DB4X2NB 230 sits in the lower part of that range with 169 kW. Its immediate neighbours are the P94 DB-A below it with 162 kW and the P94 DB above it with 180 kW. Unladen weight within it ranges from 7,370 to 17,150 kg; here the P94 DB4X2NB 230 sits at the bottom of that range with 8,000 kg. 11893 Scania models across 91 series are on record.

Scania P94 – the truck with the low P cab on the 9-litre chassis of the Scania 4 series, since 1995 a distribution and construction vehicle, 161 to 209.5 kW, six-cylinders of 8.7 to 9.0 litres

The Scania P94 belongs to the Scania 4 series introduced in 1995, whose type code combines cab and engine family: P denotes the low, off-road-capable cab, G and R the taller cabs, T the now-discontinued cab-over-engine cab, and the number 94 the chassis with the 9-litre six-cylinder engine. The P94 was thus the compact, manoeuvrable version for distribution traffic, construction sites and municipal work within the 4 series, continuing Scania's modular system of shared components across several cab and engine variants. Scania, headquartered in Södertälje, has been fully part of the Volkswagen Group since 2014.

Read on 3 more paragraphs

The register lists here 13 versions with 161 to 209.5 kW from six-cylinders of 8,725 to 9,000 cm³, unladen weights from 6,418 to 17,150 kg, gross weights from 18,200 to 28,500 kg, lengths from 6,230 to 11,650 mm and widths from 2,490 to 2,550 mm.

Scania ranks among Europe's leading heavy-truck makers and is particularly known for its modular system and the long service life of its vehicles; as a tipper, flatbed or crane-equipped truck, the P94 was a common choice for construction and municipal fleets.

On used examples, operating hours and the condition of the engine and turbocharger count, along with the clutch and manual gearbox, on tippers and crane trucks the condition of the hydraulics, and frame corrosion from construction-site work and road salt; Scania trucks are regarded as long-lived, and parts run through the dense dealer network.

Sources: SpecCodex register, model data: Scania P94, Scania (manufacturer)

Technical data

Engine

Power169 kWcorrect
Cylinders6correct
Displacement8,970 cm³correct

Dimensions and weights

Length7,150 mmcorrect
Width2,500 mmcorrect
Unladen weight8,000 kgcorrect
Gross vehicle weight18,600 kgcorrect

Where this model stands

Power-to-weight ratio: 21.1 kW/t (169 kW / 8 t)

Stronger than 22% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania P94 DB4X2NB 230 have?

The Scania P94 DB4X2NB 230 delivers 169 kW.

How much does the Scania P94 DB4X2NB 230 weigh?

The unladen weight is 8,000 kg.

What is the gross vehicle weight of the Scania P94 DB4X2NB 230?

18,600 kg.

What engine does the Scania P94 DB4X2NB 230 have?

6 cylinders, 8,970 cm³ displacement.

What are the dimensions of the Scania P94 DB4X2NB 230?

7,150 mm × 2,500 mm.

When was the Scania P94 DB4X2NB 230 built?

Production years: 2004.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare