Saurer 4CM/ 4UM – specifications
Built: 1952 · Series: Other models
The Saurer 4CM/ 4UM is a vehicle built by Saurer. Production: 1952. The engine has 6 cylinders, with a displacement of 8,720 cm³. The vehicle is 6,400 mm long and 2,220 mm wide. The unladen weight is 6,890 kg. The wheelbase measures 3,400 mm. The gross vehicle weight is 7,565 kg. The vehicle runs on 4 wheels. Unladen weight across the Saurer range ranges from 940 to 12,860 kg; the 4CM/ 4UM sits in the middle of that range with 6,890 kg. Its immediate neighbours are the SV 2 C below it with 6,270 kg and the BA 8110 cm³ above it with 6,900 kg. Gross vehicle weight across the Saurer range ranges from 1,120 to 18,000 kg; here the 4CM/ 4UM sits in the lower part of that range with 7,565 kg. 33 Saurer models across 4 series are on record.
Data for the version built 1952 · Data origin: Official register · sources
More machines from model year 1952
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Saurer – other models: collective page of Swiss trucks and the Berna marque outside the named ranges, four- to six-cylinder diesel engines from 5.3 to 11.9 litres, 6.9 to 18 tonnes gross vehicle weight
Saurer was a Swiss commercial vehicle maker based in Arbon on Lake Constance, building trucks from the second half of the 19th century until the early 1980s, before the commercial vehicle division passed in 1982 into the NAW group founded jointly with Berna and FBW. Berna, a second Swiss maker based in Olten, had been part of the Saurer group since 1929 and continued to build vehicles under its own name; this collective page therefore includes Berna models alongside Saurer types. The model designations on this page range from plain letter-and-digit combinations to tonnage figures such as 5 Ton, and among them also appears the Finnish register class Avolavakuorma-auto (BA) for open flatbed trucks.
Read on 3 more paragraphs
The register lists 20 versions with four- to six-cylinder engines from 5,319 to 11,946 cm³, kerb weights from 3,790 to 12,860 kg, gross vehicle weights from 6,900 to 18,000 kg, lengths from 6,050 to 10,860 mm and widths from 2,200 to 2,500 mm.
Saurer and Berna trucks served the Swiss transport, construction and municipal markets for decades and were also exported to Scandinavia and other European countries, which explains the Finnish registration among the models. As a smaller maker, Saurer competed with groups such as Mercedes-Benz and Volvo, scoring with rugged, easily serviced engineering.
Buying one of these older trucks used, what matters is the condition of the frame and cab, the tightness and compression of the diesel engines, and the state of the brakes and drivetrain; as both marques no longer exist, parts supply is limited and runs mostly through collector and classic-vehicle networks for Swiss commercial vehicles.
Sources: SpecCodex register, model data: Saurer (weitere Modelle), Zulassungsdaten Traficom (Finnland)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 8,720 cm³correct |
Dimensions and weights
| Length | 6,400 mmcorrect |
|---|---|
| Width | 2,220 mmcorrect |
| Wheelbase | 3,400 mmcorrect |
| Unladen weight | 6,890 kg (example vehicle as registered, incl. body – not a model value)correct |
| Gross vehicle weight | 7,565 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1 CR ID
2 DM 4X4
3 DUK-50
5 D
5 DUK-55
5 TON 4CM
5D
6DM
BA 8110 cm³
BERNA 2VM
BERNA-2DM/2VM
Berna 2DM
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.