Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Nuffield › MINI

Nuffield MINI

Built: 12/1965–10/1968 · Series: Other models

More machines from model year 1965

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Nuffield MINI is a machine built by Nuffield. Production: 12/1965–10/1968. The engine delivers 15.2 hp (11.2 kW), has 4 cylinders, with a displacement of 948 cm³. Torque is 52 Nm. Rated speed is 2,500 rpm. The machine is 2,490 mm long, 1,510 mm wide and 1,260 mm high. The unladen weight is 883 kg. The wheelbase measures 1,650 mm. Top speed is 25 km/h. The tank holds 29.5 litres. Transmission: 9 V/3 R. The engine is water-cooled. Tyres: front 4.00-15 ASF, rear 9.00-24 AS. The fuel is Diesel/Benzin. The bore measures 62 mm. The stroke is 76.2 mm. The compression ratio is 22.5:1. Maximum torque is reached at 1,750 rpm. Construction: unit construction (no separate frame). The gearbox offers 9 forward gears. There are also 3 reverse gears. Injection pressure is 137 bar. The linkage is category I. The PTO runs at 540/1000 rpm. Around 4.200 units were built. Rated output across the Nuffield range ranges from 15.2 to 65.9 hp; the MINI sits at the bottom of that range with 15.2 hp. Its immediate neighbours are the 4/25 (425) above it with 25.3 hp. Rated output across the Nuffield range ranges from 11.2 to 48.5 kW; here the MINI sits at the bottom of that range with 11.2 kW. 60 Nuffield models across 5 series are on record.

Nuffield – other models: collective page of the British tractor brand of the Nuffield Organization (renamed Leyland from 1969), Universal range, BMC engines, 11.2 to 48.5 kW, 883 to 2,660 kg unladen weight

This page gathers the Nuffield tractors the register could not assign to a named range. Nuffield was the tractor brand of the British Nuffield Organization, which became one of the major British manufacturers with the Universal range from the 1940s; after the merger that formed the British Motor Corporation (BMC), engines came from BMC itself as well as from Morris/Wolseley and IMR, including the BMC OE4 type. From 1969, as part of the restructuring into British Leyland, the brand was renamed Leyland.

Read on 3 more paragraphs

The register lists here 23 versions with 11.2 to 48.5 kW from three- to four-cylinder engines with 948 to 3,770 cm³ displacement running at 2,000 to 2,500 revolutions per minute and torques of 52 to 230 Nm. Unladen weights range from 883 to 2,660 kg, lengths from 2,490 to 3,275 mm, widths from 1,510 to 2,330 mm and heights from 1,260 to 2,299 mm; PTO output lies between 55 and 60 hp, with a gross vehicle weight of 2,000 kg on record. The register lists diesel, diesel/petrol, petrol and gas/diesel as fuels.

Alongside Fordson and Massey Ferguson, Nuffield was one of the defining British tractor brands of the post-war years and was widespread above all in Britain, Ireland and the Commonwealth. The renaming to Leyland in 1969 marked the end of the brand, though its models are still maintained today on the British vintage-tractor market.

On used examples of these historic tractors, the condition of the engine and cooling system, clutch and gearbox, brakes and steering, and rust on the sheet-metal parts and mudguards all matter; on the petrol and mixed-fuel variants, carburettor condition is an additional check point. Spare parts today run mainly through dealers and clubs specialising in British vintage tractors.

Sources: SpecCodex register, model data: Nuffield (weitere Modelle), Nuffield Organization (Wikipedia)

Technical data

Engine

FuelDiesel/Benzincorrect
Power15.2 hp (11.2 kW)correct
Rated speed2,500 rpmcorrect
Torque52 Nmcorrect
Speed at max. torque1,750 rpmcorrect
Cylinders4correct
Displacement948 cm³correct
Bore62 mmcorrect
Stroke76.2 mmcorrect
Compression ratio22.5correct
Injection pressure137 barcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length2,490 mmcorrect
Width1,510 mmcorrect
Height1,260 mmcorrect
Wheelbase1,650 mmcorrect
Unladen weight883 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox9 V/3 Rcorrect
Forward gears9correct
Reverse gears3correct
Front tyres4.00-15 ASFcorrect
Rear tyres9.00-24 AScorrect
Top speed25 km/hcorrect

Working data

Fuel tank capacity29.5 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built4,200correct

Other data

Linkage categoryCat Icorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 12.7 kW/t (11 kW / 0.9 t)

Power class: Compact (< 40 hp)

Stronger than 4% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Nuffield MINI have?

The Nuffield MINI delivers 15.2 hp.

How much does the Nuffield MINI weigh?

The unladen weight is 883 kg.

What engine does the Nuffield MINI have?

4 cylinders, 948 cm³ displacement, Diesel/Benzin.

How fast does the Nuffield MINI go?

Top speed is 25 km/h.

What are the dimensions of the Nuffield MINI?

2,490 mm × 1,510 mm × 1,260 mm.

When was the Nuffield MINI built?

Production years: 12/1965–10/1968.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 30 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare