MAN 4S2B Allrad
Built: 1959-1960 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine make | MANcorrect |
|---|---|
| Fuel | dieselcorrect |
| Cylinders | 6correct |
| Naturally aspirated | naturally aspiratedcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Wheelbase | 2,400correct |
|---|---|
| Unladen weight | 3,420correct |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Forward gears | 7correct |
| Reverse gears | 1correct |
Working data
| Lifting capacity | 3,600correct |
|---|---|
| Linkage category | Cat I, Cat IIcorrect |
Origin and approval
| Plant | Augsburg, Germanycorrect |
|---|
Frequently asked questions
What engine does the MAN 4S2B Allrad have?
6 cylinders, Diesel.
When was the MAN 4S2B Allrad built?
Production years: 1959-1960.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.