Mafa CONT.SAL40.27E
Built: 2001 · Series: Other models
More machines from model year 2001
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mafa – other models: the collective page of heavy trailers outside the named ranges, types such as CONT.SAL 40.27E and SAL40.24/82EFG, up to 25 tonnes unladen weight, up to 42 tonnes gross weight
This page gathers the Mafa trailers the register could not assign to a named range. Mafa builds heavy multi-axle trailers for container and heavy-load haulage, recognisable from types such as CONT.SAL 40.27E, SAL40.24/82EFG or SAL36.20E, whose codes combine letters for body type and equipment with numbers for axle count and payload class.
Read on 3 more paragraphs
The register lists here 20 versions with unladen weights from 3,640 to 25,145 kg, gross weights from 18,000 to 42,000 kg, lengths from 7,510 to 13,850 mm and widths from 2,430 to 2,550 mm.
Trailers of this class run in drawbar combinations behind tractor units or lorry chassis and take on containers, swap bodies or heavy loads where a single vehicle reaches its payload limit; the wide span from light to extremely heavy versions shows a range from standard to special-transport trailers. The container versions carry twist-lock fittings for the standard 20- and 40-foot sizes, allowing them to be used regardless of the individual container's owner.
On used examples, the frame and torsional stiffness, the condition of axles, steering axles and brakes, locks for containers or swap bodies, and a complete history of safety inspections all count; parts run through specialist trailer workshops. On the heaviest versions, the condition of the multi-axle steering linkage deserves particular attention, since repairs there are costly.
Sources: SpecCodex register, model data: Mafa (weitere Modelle)
Technical data
Dimensions and weights
| Length | 7,740 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 5,600 mmcorrect |
| Unladen weight | 4,740 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Mafa CONT.SAL40.27E weigh?
The unladen weight is 4,740 kg.
What is the gross vehicle weight of the Mafa CONT.SAL40.27E?
39,000 kg.
Up to what speed is the Mafa CONT.SAL40.27E approved?
Approved up to 100 km/h.
What are the dimensions of the Mafa CONT.SAL40.27E?
7,740 mm × 2,500 mm.
When was the Mafa CONT.SAL40.27E built?
Production years: 2001.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
CONT SAL 40.27 EHK KR
CONT. SAL 40.2E HK
CONT.SAL 40.27 E
CONT.SAL 40.27 EHK
CONT.SAL 40.27E
L 24/75 E
L18/62E
L18/65E
L18/65E 222
L24/65E
L24/80E
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.