Lamborghini R6.175
Built: Year not documented · Series: R6
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lamborghini R6 (since 2005) – the Agrotron sister with the bull: R6.100 to R6.185 and VRT.190, the number as hp, Deutz engines from the SDF group, 73 to 149 kW
The R6 is Lamborghini's mid- and upper range of the 2000s and 2010s – and technically the sister of the Deutz-Fahr Agrotron, because since 1995 Deutz-Fahr has belonged to the SDF group of Treviglio, which has owned Lamborghini since 1973: same engines, same transmissions, different bonnet and colour. The type logic: R6 stands for the series, the number after the dot gives the output in hp – R6.100 about 100 hp, R6.140 about 140 hp, R6.185 about 185 hp – VRT.190 marks the version with continuously variable transmission (Vario technology), which SDF markets as TTV. The engines are Deutz four- and six-cylinders of 4.04 and 6.06 litres, water-cooled with common rail – a break with the air-cooled tradition SAME and Lamborghini stood for over decades.
Read on 3 more paragraphs
The register lists 10 versions with 73 to 149 kW (100 to 203 hp), 4,038 to 6,057 cm³ with four or six cylinders, unladen weights from 4,440 to 7,300 kg, lengths from 4,139 to 4,867 mm, widths from 1,880 to 2,720 mm and heights from 2,685 to 3,127 mm; one model is approved for B100 biodiesel.
Within the SDF group Lamborghini serves the upper segment: the R6 came with full equipment – powershift, suspended front axle, cab suspension – and the bull badge that attracts buyers in Italy and France who do not want the Deutz-Fahr.
On used tractors, operating hours, engine condition and aftertreatment on the younger models, powershift or VRT continuously variable transmission, front-axle suspension and hydraulics count; parts run through SDF dealers and are identical to the Agrotron.
Sources: SpecCodex register, model data: Lamborghini R6, Lamborghini Trattori (SDF, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 180 hp (132 kW)correct |
| Cylinders | 6correct |
| Displacement | 6,057 cm³correct |
Dimensions and weights
| Length | 4,757 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Height | 2,997 mmcorrect |
| Wheelbase | 2,767 mmcorrect |
| Ground clearance | 570 mmcorrect |
| Unladen weight | 5,970 kgcorrect |
Drivetrain and chassis
| Top speed | 50 km/hcorrect |
|---|
Working data
| Fuel tank capacity | 305 lcorrect |
|---|
Origin and approval
| Construction | Standardtraktorcorrect |
|---|
Where this model stands
Power-to-weight ratio: 22.1 kW/t (132 kW / 6 t)
Power class: Large (100–180 hp)
Stronger than 89% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lamborghini R6.175 have?
The Lamborghini R6.175 delivers 180 hp.
How much does the Lamborghini R6.175 weigh?
The unladen weight is 5,970 kg.
What engine does the Lamborghini R6.175 have?
6 cylinders, 6,057 cm³ displacement, Diesel.
How fast does the Lamborghini R6.175 go?
Top speed is 50 km/h.
What are the dimensions of the Lamborghini R6.175?
4,757 mm × 2,500 mm × 2,997 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.