Komatsu PC09-1
Series: Komatsu Mini Excavator
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | 2D70Ecorrect |
|---|---|
| Cylinders | 2correct |
| Displacement | 568.6 cm³correct |
| Aspiration | Water-cooled 4 cycle turbulence chambercorrect |
| Coolant capacity | 2.3 lcorrect |
| Engine oil capacity | 1.9 lcorrect |
Dimensions and weights
| Ground clearance | 1,700.8correct |
|---|---|
| Unladen weight | 940 kgcorrect |
Working data
| Hydraulic oil capacity | 9.1 lcorrect |
|---|---|
| Fuel tank capacity | 11.4 lcorrect |
Other data
| Height | 2,100.1correct |
|---|
Frequently asked questions
How much does the Komatsu PC09-1 weigh?
The unladen weight is 940 kg.
What engine does the Komatsu PC09-1 have?
2 cylinders, 569 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Mini excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.