Komatsu PC20 MRx
Series: Komatsu Mini Excavator
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | 3D74E-N3Acorrect |
|---|---|
| Power | 14.2 kWcorrect |
| Rated speed | 2,600 rpmcorrect |
| Displacement | 1,006.2 cm³correct |
| Aspiration | Naturalcorrect |
| Coolant capacity | 5.7 lcorrect |
| Engine oil capacity | 4.2 lcorrect |
Dimensions and weights
| Unladen weight | 2,260 kgcorrect |
|---|
Working data
| Pump flow | 59.8 l/mincorrect |
|---|---|
| Hydraulic oil capacity | 21.2 lcorrect |
| Hydraulic pressure | 210 barcorrect |
| Fuel tank capacity | 25.4 lcorrect |
Other data
| Height | 2,411correct |
|---|
Where this model stands
Power-to-weight ratio: 6.3 kW/t (14 kW / 2.3 t)
Stronger than 30% of the mini excavators in the register — out of 400 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Komatsu PC20 MRx have?
The Komatsu PC20 MRx delivers 14.2 kW.
How much does the Komatsu PC20 MRx weigh?
The unladen weight is 2,260 kg.
What engine does the Komatsu PC20 MRx have?
1,006 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Mini excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.