StartMini excavatorsKomatsu › PC01-1

Komatsu PC01-1

Series: Komatsu Mini Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Komatsu PC01-1 belongs to the Komatsu Mini Excavator series. The engine delivers 3.5 hp (2.6 kW), with a displacement of 163.9 cm³. Rated speed is 3,000 rpm. The unladen weight is 380 kg. Ground clearance is 100.6 mm. The tank holds 4.5 litres. The pump delivers 10.2 l/min. The hydraulic tank holds 4.9 litres. Working pressure is 146.9 bar. The engine fitted is the GX160KI. The Komatsu Mini Excavator series covers 27 models. Rated output within it ranges from 3.5 to 73.5 hp; the PC01-1 sits at the bottom of that range with 3.5 hp. Its immediate neighbours are the PC02-1 above it with 4.6 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine modelGX160KIcorrect
Power3.5 hp (2.6 kW)correct
Rated speed3,000 rpmcorrect
Displacement163.9 cm³correct

Dimensions and weights

Ground clearance100.6correct
Unladen weight380 kgcorrect

Working data

Pump flow10.2 l/mincorrect
Hydraulic oil capacity4.9 lcorrect
Hydraulic pressure146.9 barcorrect
Fuel tank capacity4.5 lcorrect

Where this model stands

Power-to-weight ratio: 6.8 kW/t (3 kW / 0.4 t)

Stronger than 0% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu PC01-1 have?

The Komatsu PC01-1 delivers 2.6 kW.

How much does the Komatsu PC01-1 weigh?

The unladen weight is 380 kg.

What engine does the Komatsu PC01-1 have?

164 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare