Start › Mini excavators › Komatsu › PC20-2

Komatsu PC20-2

Series: Komatsu Mini Excavator

Source: https://www.komatsu.eu/de/hydraulikbagger/minibagger/pc20r-5

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The PC20-2 from Komatsu is part of the Komatsu Mini Excavator series. The engine delivers 21.6 hp (15.9 kW), with a displacement of 1,412.6 cm³. The unladen weight is 2,798.7 kg. Ground clearance is 307.8 mm. The tank holds 40.1 litres. The pump delivers 78.4 l/min. The hydraulic tank holds 65.1 litres. Working pressure is 171.7 bar. The engine fitted is the 3D84-1A. The Komatsu Mini Excavator series covers 27 models. Rated output within it ranges from 3.5 to 73.5 hp; the PC20-2 sits in the lower part of that range with 21.6 hp. Its immediate neighbours are the PC20MR-2 below it with 21.1 hp and the PC25R-8 above it with 24.1 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine model3D84-1Acorrect
Power21.6 hp (15.9 kW)correct
Displacement1,412.6 cm³correct

Dimensions and weights

Ground clearance307.8correct
Unladen weight2,798.7 kgcorrect

Working data

Pump flow78.4 l/mincorrect
Hydraulic oil capacity65.1 lcorrect
Hydraulic pressure171.7 barcorrect
Fuel tank capacity40.1 lcorrect

Other data

Height2,337.8correct

Where this model stands

Power-to-weight ratio: 5.7 kW/t (16 kW / 2.8 t)

Stronger than 37% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu PC20-2 have?

The Komatsu PC20-2 delivers 21.6 hp.

How much does the Komatsu PC20-2 weigh?

The unladen weight is 2,799 kg.

What engine does the Komatsu PC20-2 have?

1,413 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

PC01-1

PC02-1

PC03-2

PC03-2F

PC09-1

PC10-2

PC12R-8

PC130-6

PC15R-8

PC18MR-2

PC20 MRx

PC20MR-2

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare