Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Güldner › G-Reihe › G 50

Güldner G 50

Built: 1963–1960 · Series: G-Reihe

More machines from model year 1963

Wikimedia Commons · CC0 · Werner Hartmann · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Güldner G 50 belongs to the G-Reihe series. Production: 1963–1960. The engine delivers 50 hp (36.6 kW), has 4 cylinders, with a displacement of 3,140 cm³. The machine is 3,686 mm long, 1,862 mm wide and 1,560 mm high. The unladen weight is 3,495 kg. The wheelbase measures 2,200 mm. Ground clearance is 387 mm. Top speed is 20 km/h. The tank holds 50 litres. Transmission: (2V+1R)x4. The engine is air-cooled. Tyres: front 6.00-20 ASF, rear 11-36 AS. The fuel is diesel. Construction: frameless unit construction. The gearbox offers 8 forward gears. There are also 4 reverse gears. Around 1.845 units were built. The G-Reihe series covers 18 models. Rated output within it ranges from 15 to 65 hp; the G 50 sits in the upper part of that range with 50 hp. Its immediate neighbours are the G 50 (Gotland) below it with 48 hp and the G 60 (S) above it with 60 hp. Unladen weight within it ranges from 890 to 3,985 kg; here the G 50 sits in the upper part of that range with 3,495 kg. 78 Güldner models across 6 series are on record.

Güldner G Series – Main Series of the Aschaffenburg Builder, 1962 to 1969: two- to six-cylinder engines with 11 to 47.6 kW (15 to 60 hp), 885 to 4,712 cm³ displacement

The G series was the main line of the tractor manufacturer Güldner, based in Aschaffenburg, and covered a wide power spectrum from 1962 to 1969. According to the register, output of the recorded models ranges from 11 to 47.6 kW, with models rated in horsepower from 15 to 60 hp, using two- to six-cylinder engines with displacement from 885 to 4,712 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 890 to 3,985 kg, wheelbase from 1,650 to 2,416 mm, and top speed of the listed models spans 19.4 to 26.22 km/h. Models with the S suffix denoted a synchronised gearbox.

The G series was the manufacturer's broadest range until Güldner ended tractor production in 1969, spanning compact models such as the G 15 to large variants such as the G 75. For a used model, the exact engine matters most, as output and cylinder count differ considerably within the series.

A synchronised gearbox, as fitted to the S models of the G series, allows shifting between adjacent gears without an intermediate clutch action and without the extra throttle blip needed on unsynchronised gearboxes, easing gear changes during field work. Across the entire power range of the G series up to 47.6 kW, the three-point hitch stayed within category I under ISO 730, and the PTO ran at 540 rpm. Parts for the G series are today mainly available through specialist Güldner and vintage-machinery dealers.

Sources: SpecCodex register, model data: Güldner G-Reihe

Technical data

Engine

Fueldieselcorrect
Power50 hp (36.6 kW)correct
Cylinders4correct
Displacement3,140 cm³correct
Coolingair-cooledcorrect

Dimensions and weights

Length3,686 mmcorrect
Width1,862 mmcorrect
Height1,560 mmcorrect
Wheelbase2,200 mmcorrect
Ground clearance387 mmcorrect
Unladen weight3,495 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox(2V+1R)x4correct
Forward gears8correct
Reverse gears4correct
Front tyres6.00-20 ASFcorrect
Rear tyres11-36 AScorrect
Top speed20 km/hcorrect

Working data

Fuel tank capacity50 lcorrect

Origin and approval

Constructionframeless unit constructioncorrect
Units built1,845correct

Where this model stands

Power-to-weight ratio: 10.5 kW/t (37 kW / 3.5 t)

Power class: Universal (40–100 hp)

Stronger than 34% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Güldner G 50 have?

The Güldner G 50 delivers 50 hp.

How much does the Güldner G 50 weigh?

The unladen weight is 3,495 kg.

What engine does the Güldner G 50 have?

4 cylinders, 3,140 cm³ displacement, Diesel.

How fast does the Güldner G 50 go?

Top speed is 20 km/h.

What are the dimensions of the Güldner G 50?

3,686 mm × 1,862 mm × 1,560 mm.

When was the Güldner G 50 built?

Production years: 1963–1960.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare