Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Favorit › Favorit 4 S/SA

Fendt Favorit 4 S/SA

Built: 1966–1970 · Series: Favorit

More machines from model year 1966

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Favorit 4 S/SA from Fendt is part of the Favorit series. Production: 1966–1970. The engine delivers 90 hp (65.9 kW), has 6 cylinders, with a displacement of 5,100 cm³. Rated speed is 2,300 rpm. The machine is 4,347 mm long, 2,145 mm wide and 1,935 mm high. The unladen weight is 3,619 kg. The wheelbase measures 2,608 mm. Ground clearance is 400 mm. Top speed is 30 km/h. The tank holds 130 litres. The engine is water-cooled. Tyres: front 7.50-20 ASF ( A: 11.2/10-24 AS ), rear 18.4/15-34 AS. The fuel is diesel. Construction: unit construction (no separate frame). The linkage is category II. Around 695 (S: 164, SA: 531) units were built. The Favorit series covers 44 models. Rated output within it ranges from 40 to 110 hp; the Favorit 4 S/SA sits in the upper part of that range with 90 hp. Its immediate neighbours are the Favorit 4 below it with 80 hp and the Favorit 11 S/SA above it with 95 hp. Unladen weight within it ranges from 2,330 to 4,590 kg; here the Favorit 4 S/SA sits in the middle of that range with 3,619 kg. 1545 Fendt models across 89 series are on record.

Fendt Favorit – Tractor Series Since 1958: Forerunner of Stepless Vario Technology, three- to six-cylinder diesels with 29.3 to 110 kW (40 to 150 hp), 2,976 to 6,240 cm³ displacement

Fendt introduced the Favorit name in 1958 with the Favorit 1 and developed the series over several decades. The recorded models span a wide power band: output from 29.3 to 110 kW, with models rated in horsepower from 40 to 150 hp, using three- to six-cylinder engines with displacement from 2,976 to 6,240 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 2,330 to 6,800 kg, wheelbase from 2,168 to 2,696 mm, and top speed of the listed models spans 20 to 30 km/h. In 1995 Fendt presented, in a Favorit model, the first production-ready stepless Vario transmission in tractor manufacturing – a technical milestone that still shapes the brand's model policy today.

Across many model years, the Favorit series occupied the upper-mid to premium segment of the Fendt line-up. When buying a used Favorit, distinguishing early mechanical model years from later Vario versions matters, since the operating concept and service demands differ fundamentally.

With a power range up to 110 kW, the Favorit series' three-point hitch spanned from category I on the smaller models to category II under ISO 730 at the upper end; the most powerful Favorit Vario versions already approached the class otherwise reserved for category III. Early Favorit model years before 1999 still ran without any EU emissions certification, while later Vario models already fell under the first European emissions stages.

Sources: SpecCodex register, model data: Fendt Favorit, Fendt

Technical data

Engine

Fueldieselcorrect
Power90 hp (65.9 kW)correct
Rated speed2,300 rpmcorrect
Cylinders6correct
Displacement5,100 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,347 mmcorrect
Width2,145 mmcorrect
Height1,935 mmcorrect
Wheelbase2,608 mmcorrect
Ground clearance400 mmcorrect
Unladen weight3,619 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
GearboxSynchrongetriebe 16V/8Rcorrect
Front tyres7.50-20 ASF ( A: 11.2/10-24 AS )correct
Rear tyres18.4/15-34 AScorrect
Top speed30 km/hcorrect

Working data

Fuel tank capacity130 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built695 (S: 164, SA: 531)correct

Other data

Linkage categoryCat IIcorrect

Where this model stands

Power-to-weight ratio: 18.2 kW/t (66 kW / 3.6 t)

Power class: Universal (40–100 hp)

Stronger than 60% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Favorit 4 S/SA have?

The Fendt Favorit 4 S/SA delivers 90 hp.

How much does the Fendt Favorit 4 S/SA weigh?

The unladen weight is 3,619 kg.

What engine does the Fendt Favorit 4 S/SA have?

6 cylinders, 5,100 cm³ displacement, Diesel.

How fast does the Fendt Favorit 4 S/SA go?

Top speed is 30 km/h.

What are the dimensions of the Fendt Favorit 4 S/SA?

4,347 mm × 2,145 mm × 1,935 mm.

When was the Fendt Favorit 4 S/SA built?

Production years: 1966–1970.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare