Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Favorit › FAVORIT 716

Fendt FAVORIT 716

Series: Favorit

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Favorit 716 is a tractor from Fendt’s Favorit series. It belongs to the line that has been continuously refined since the late 1950s. The engine has six cylinders and a displacement of 5 702 cm³, delivering 160 hp (118 kW) at a rated speed of 2 100 rpm. Torque is 724 Nm, the gearbox is continuously variable, and the top speed reaches 50 km/h. The wheelbase measures 2 700 mm, the fuel tank holds 305 l and the lift category is Cat III. The drawbar speed can be set to 540 rpm, 750 rpm or 1 000 rpm.

With 118 kW the Favorit 716 ranks second out of seventeen models with a power rating in the Favorit series. The next smaller model is the Favorit 615LS at 110 kW, while the next larger is the Favorit 822 at 154 kW. The series power range spans from 29.3 kW to 154 kW.

Thus the Favorit 716 sits between the smaller and the largest tractors of the line. It provides more power than the 110 kW version but remains below the top‑end 154 kW model, making it suitable for tasks that need medium to high drawbar pull without reaching the maximum capabilities of the largest machines.

Fendt Favorit – Tractor Series Since 1958: Forerunner of Stepless Vario Technology, three- to six-cylinder diesels with 29.3 to 110 kW (40 to 150 hp), 2,976 to 6,240 cm³ displacement

Fendt introduced the Favorit name in 1958 with the Favorit 1 and developed the series over several decades. The recorded models span a wide power band: output from 29.3 to 110 kW, with models rated in horsepower from 40 to 150 hp, using three- to six-cylinder engines with displacement from 2,976 to 6,240 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 2,330 to 6,800 kg, wheelbase from 2,168 to 2,696 mm, and top speed of the listed models spans 20 to 30 km/h. In 1995 Fendt presented, in a Favorit model, the first production-ready stepless Vario transmission in tractor manufacturing – a technical milestone that still shapes the brand's model policy today.

Across many model years, the Favorit series occupied the upper-mid to premium segment of the Fendt line-up. When buying a used Favorit, distinguishing early mechanical model years from later Vario versions matters, since the operating concept and service demands differ fundamentally.

With a power range up to 110 kW, the Favorit series' three-point hitch spanned from category I on the smaller models to category II under ISO 730 at the upper end; the most powerful Favorit Vario versions already approached the class otherwise reserved for category III. Early Favorit model years before 1999 still ran without any EU emissions certification, while later Vario models already fell under the first European emissions stages.

Sources: SpecCodex register, model data: Fendt Favorit, Fendt

Technical data

Engine

Power160 hp (118 kW)correct
Rated speed2,100 rpmcorrect
Torque724 Nmcorrect
Cylinders6correct
Displacement5,702 cm³correct

Dimensions and weights

Wheelbase2,700 mmcorrect

Drivetrain and chassis

Gearboxcontinuously variablecorrect
Top speed50 km/hcorrect

Working data

Fuel tank capacity305 lcorrect

Other data

Linkage categoryCat IIIcorrect
PTO speed540/750/1000 rpmcorrect

Frequently asked questions

How much power does the Fendt FAVORIT 716 have?

The Fendt FAVORIT 716 delivers 160 hp.

What engine does the Fendt FAVORIT 716 have?

6 cylinders, 5,702 cm³ displacement.

How fast does the Fendt FAVORIT 716 go?

Top speed is 50 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare