Start › Tractors › Fendt › Farmer 103

Fendt Farmer 103

Built: 1972–1974 · Series: Farmer 100

More machines from model year 1972

Source: https://www.technikboerse.com/fr/gebraucht/tracteur-1/fendt-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Farmer 103, Fendt offers a model from the Farmer 100 series. Production: 1972–1974. The engine delivers 48 hp (35 kW), has 3 cylinders, with a displacement of 2,550 cm³. Rated speed is 2,400 rpm. The machine is 3,626 mm long, 1,710 mm wide and 2,347 mm high. The unladen weight is 2,270 kg. The wheelbase measures 2,078 mm. Ground clearance is 380 mm. Top speed is 25 km/h. The tank holds 65 litres. The engine is water-cooled. Tyres: front 6.00-16, rear 9-36. The fuel is diesel. Construction: unit construction (no separate frame). The gearbox offers 13 forward gears. There are also 4 reverse gears. The linkage is category I. Around 605 units were built. The Farmer 100 series covers 5 models and was built 1972–1985. Rated output within it ranges from 40 to 75 hp; the Farmer 103 sits in the lower part of that range with 48 hp. Its immediate neighbours are the Farmer 102 below it with 40 hp and the Farmer 105 S/SA above it with 60 hp. Unladen weight within it ranges from 2,270 to 3,225 kg; here the Farmer 103 sits at the bottom of that range with 2,270 kg. 1545 Fendt models across 89 series are on record.

Fendt Farmer 102 to 108 – the classic standard-tractor range before Vario: three- and four-cylinders, S and SA as trim variants, 29 to 55 kW, 2.27 to 3.23 t

The Farmer range was Fendt's standard-tractor programme for decades before Vario transmission technology transformed the whole line-up from the 1990s onward; the Farmer 100 series, with the 102 to 108 models, covers the mid power segment for classic arable and grassland farming. The type logic orders the number by power class in ascending order, S on the 105 marking a special or sport version with more power, SA a four-wheel-drive variant of that trim. The engines range from a three-cylinder in the 102 to a four-cylinder in the larger models, all with a classic manual gearbox and mechanical injection typical of Fendt tractors before the Vario era.

Read on 3 more paragraphs

The register lists 5 versions with 29.3 to 55 kW from engines of 2,550 to 4,154 cm³, operating weights from 2,270 to 3,225 kg and a linkage lift capacity of up to 3,200 kg; lengths range from 3,625 to 3,900 mm, widths from 1,706 to 2,092 mm and heights from 2,347 to 2,488 mm at rated speeds of 2,175 to 2,400 rpm.

The Farmer 100 tractors represent the solid, mechanically simple Fendt generation before the Vario era and are in demand on the used market among farms looking for a rugged, easily repaired all-rounder without complex electronics.

On used tractors, the condition of clutch and gearbox, leak-free hydraulics and injection pump, rust on panels and mudguards, the condition of the front axle on the SA four-wheel-drive models and parts supply, still working well for the mechanically simple technology through the Fendt network, are what count.

Sources: SpecCodex register, model data: Fendt Farmer 100, Fendt (manufacturer)

Technical data

Engine

Fuel	dieselcorrect
Power	48 hp (35 kW)correct
Rated speed	2,400 rpmcorrect
Cylinders	3correct
Displacement	2,550 cm³correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	3,626 mmcorrect
Width	1,710 mmcorrect
Height	2,347 mmcorrect
Wheelbase	2,078 mmcorrect
Ground clearance	380 mmcorrect
Unladen weight	2,270 kgcorrect

Drivetrain and chassis

Drive	rear-wheel drivecorrect
Gearbox	Syncrongetriebe 13 Vor 4 Rückwärtscorrect
Forward gears	13correct
Reverse gears	4correct
Front tyres	6.00-16correct
Rear tyres	9-36correct
Top speed	25 km/hcorrect

Working data

Fuel tank capacity	65 lcorrect

Origin and approval

Construction	unit construction (no separate frame)correct
Units built	605correct

Other data

Linkage category	Cat Icorrect

Where this model stands

Power-to-weight ratio: 15.4 kW/t (35 kW / 2.3 t)

Power class: Universal (40–100 hp)

Stronger than 32% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Farmer 103 have?

The Fendt Farmer 103 delivers 48 hp.

How much does the Fendt Farmer 103 weigh?

The unladen weight is 2,270 kg.

What engine does the Fendt Farmer 103 have?

3 cylinders, 2,550 cm³ displacement, Diesel.

How fast does the Fendt Farmer 103 go?

Top speed is 25 km/h.

What are the dimensions of the Fendt Farmer 103?

3,626 mm × 1,710 mm × 2,347 mm.

When was the Fendt Farmer 103 built?

Production years: 1972–1974.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →