Fendt 936 Vario (11780 kg) Gen6
Built: 2019–2026 · Series: 900 Vario Gen6
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fendt 900 Vario Gen6 930 to 942 – Fendt's largest range with a MAN engine: a 9.04-litre six-cylinder, stepless Vario transmission, 220 to 305 kW, 11.3 to 11.78 t
The 900 Vario is Fendt's largest standard-tractor range, built in Marktoberdorf for professional arable farming with high pulling-power demands. Unlike Fendt's smaller ranges, which mostly run Deutz or AGCO's own Power engines, the sixth generation of the 900 series relies on a MAN six-cylinder of 9,037 cm³, supplying the litre output needed for the flagship 936, 939 and 942 Vario models; the number in the model designation orders the power class in ascending order. The stepless Vario transmission transmits power without gear steps even in Fendt's largest models, one model also approved for pure rapeseed oil fuel (RME).
Read on 3 more paragraphs
The register lists 5 versions with power recorded from 220 to 305 kW from six-cylinders of 9,037 cm³, torque from 1,218 to 1,310 Nm at 2,200 rpm and operating weights from 11,300 to 11,780 kg at a linkage lift capacity of 12,410 kg; lengths range from 5,655 to 5,890 mm.
The 900 Vario is the top of Fendt's line-up for large arable farms and contractors with heavy implements and high pulling-power demands, where it competes with the Case IH Magnum and the John Deere 8R.
On used tractors, the condition of the Vario transmission, leak-free hydraulics given the many control units, rust on cab and bonnet, the condition of front-axle suspension and tyres and parts supply for the MAN engine, run through the Fendt network, are what count.
Sources: SpecCodex register, model data: Fendt 900 Vario Gen6, Fendt (AGCO, Hersteller)
Technical data
Engine
| Engine | MAN, 6 cyl.correct |
|---|---|
| Power | 355 hpcorrect |
| Displacement | 9,037 cm³correct |
Dimensions and weights
| Unladen weight | 11,780 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox | Vario TA300correct |
|---|
Working data
| Lifting capacity | 12,410 kgcorrect |
|---|---|
| Fuel tank capacity | 625 lcorrect |
| Hydraulic flow | 165 l/mincorrect |
Where this model stands
Power-to-weight ratio: 22.2 kW/t (261 kW / 11.8 t)
Power class: Heavy (> 180 hp)
Stronger than 98% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fendt 936 Vario have?
The Fendt 936 Vario delivers 355 hp.
How much does the Fendt 936 Vario weigh?
The unladen weight is 11,780 kg.
What engine does the Fendt 936 Vario have?
9,037 cm³ displacement.
How much does the rear linkage of the Fendt 936 Vario lift?
The rear linkage lifts 12,410 kg.
When was the Fendt 936 Vario built?
Production years: 2019–2026.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
3 current listings for Fendt 936 Vario on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: api.fendt.com (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
