Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › 900 Vario Gen6 › 930 Vario

Fendt 930 Vario (220 kW) Gen6

Built: 2019–2026 · Series: 900 Vario Gen6

More machines from model year 2019

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 930 Vario Gen6 from Fendt is part of the 900 Vario Gen6 series. Production: 2019–2026. The engine delivers 296 hp (220 kW), has 6 cylinders, with a displacement of 9,037 cm³. The engine comes from MAN. Torque is 1,218 Nm. Rated speed is 2,200 rpm. The machine is 5,655 mm long, 2,750 mm wide and 3,322 mm high. The unladen weight is 11,300 kg. The wheelbase measures 3,050 mm. Lifting capacity is 12,410 kg. Transmission: Vario TA300. The engine is water-cooled. The fuel is diesel. The linkage is category III. The PTO runs at 540E/1000 rpm. The 900 Vario Gen6 series covers 5 models and was built 2019–2026. Rated output within it ranges from 296 to 415 hp; the 930 Vario sits at the bottom of that range with 296 hp. Its immediate neighbours are the 933 Vario above it with 326 hp. Unladen weight within it ranges from 11,300 to 11,780 kg; here the 930 Vario sits at the bottom of that range with 11,300 kg. 1545 Fendt models across 89 series are on record.

Fendt 900 Vario Gen6 930 to 942 – Fendt's largest range with a MAN engine: a 9.04-litre six-cylinder, stepless Vario transmission, 220 to 305 kW, 11.3 to 11.78 t

The 900 Vario is Fendt's largest standard-tractor range, built in Marktoberdorf for professional arable farming with high pulling-power demands. Unlike Fendt's smaller ranges, which mostly run Deutz or AGCO's own Power engines, the sixth generation of the 900 series relies on a MAN six-cylinder of 9,037 cm³, supplying the litre output needed for the flagship 936, 939 and 942 Vario models; the number in the model designation orders the power class in ascending order. The stepless Vario transmission transmits power without gear steps even in Fendt's largest models, one model also approved for pure rapeseed oil fuel (RME).

Read on 3 more paragraphs

The register lists 5 versions with power recorded from 220 to 305 kW from six-cylinders of 9,037 cm³, torque from 1,218 to 1,310 Nm at 2,200 rpm and operating weights from 11,300 to 11,780 kg at a linkage lift capacity of 12,410 kg; lengths range from 5,655 to 5,890 mm.

The 900 Vario is the top of Fendt's line-up for large arable farms and contractors with heavy implements and high pulling-power demands, where it competes with the Case IH Magnum and the John Deere 8R.

On used tractors, the condition of the Vario transmission, leak-free hydraulics given the many control units, rust on cab and bonnet, the condition of front-axle suspension and tyres and parts supply for the MAN engine, run through the Fendt network, are what count.

Sources: SpecCodex register, model data: Fendt 900 Vario Gen6, Fendt (AGCO, Hersteller)

Technical data

Engine

Engine makeMANcorrect
EngineMAN, 6 cyl.correct
Fueldieselcorrect
Power296 hp (220 kW)correct
Rated speed2,200 rpmcorrect
Torque1,218 Nmcorrect
Cylinders6correct
Displacement9,037 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length5,655 mmcorrect
Width2,750 mmcorrect
Height3,322 mmcorrect
Wheelbase3,050 mmcorrect
Unladen weight11,300 kgcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect
GearboxVario TA300correct

Working data

Lifting capacity12,410 kgcorrect
Fuel tank capacity625 lcorrect
Hydraulic flow165 l/mincorrect

Other data

Linkage categoryCat IIIcorrect
PTO speed540E/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 19.5 kW/t (220 kW / 11.3 t)

Power class: Heavy (> 180 hp)

Stronger than 97% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt 930 Vario have?

The Fendt 930 Vario delivers 296 hp.

How much does the Fendt 930 Vario weigh?

The unladen weight is 11,300 kg.

What engine does the Fendt 930 Vario have?

6 cylinders, 9,037 cm³ displacement, Diesel.

How much does the rear linkage of the Fendt 930 Vario lift?

The rear linkage lifts 12,410 kg.

What are the dimensions of the Fendt 930 Vario?

5,655 mm × 2,750 mm × 3,322 mm.

When was the Fendt 930 Vario built?

Production years: 2019–2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Used equipment offers
1 current listings for Fendt 930 Vario on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: api.fendt.com (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare