Start › Tractors › Fendt › 900 Vario Gen6 › 933 Vario

Fendt 933 Vario (11300 kg) Gen6

Built: 2019–2026 · Series: 900 Vario Gen6

More machines from model year 2019

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 900 Vario Gen6 series from Fendt includes the 933 Vario Gen6. Production: 2019–2026. The engine delivers 326 hp (220 kW), has 6 cylinders. Torque is 1,310 Nm. Rated speed is 2,200 rpm. The machine is 5,655 mm long, 2,750 mm wide and 3,322 mm high. The unladen weight is 11,300 kg. The wheelbase measures 3,050 mm. Ground clearance is 570 mm. Top speed is 50 km/h. Lifting capacity is 12,410 kg. Transmission: Vario TA300. The engine is water-cooled. Tyres: front 600/65 R 34, rear 710/70 R 42. The fuel is Diesel/RME. The bore measures 108 mm. The stroke is 130 mm. Maximum torque is reached at 1,450 rpm. Construction: unit construction (no separate frame). Injection pressure is 1600 bar. The linkage is category III. The PTO runs at 540E/1000 rpm. The 900 Vario Gen6 series covers 5 models and was built 2019–2026. Rated output within it ranges from 296 to 415 hp; the 933 Vario sits in the lower part of that range with 326 hp. Its immediate neighbours are the 930 Vario below it with 296 hp and the 936 Vario above it with 355 hp. Unladen weight within it ranges from 11,300 to 11,780 kg; here the 933 Vario sits at the bottom of that range with 11,300 kg. 1545 Fendt models across 89 series are on record.

Fendt 900 Vario Gen6 930 to 942 – Fendt's largest range with a MAN engine: a 9.04-litre six-cylinder, stepless Vario transmission, 220 to 305 kW, 11.3 to 11.78 t

The 900 Vario is Fendt's largest standard-tractor range, built in Marktoberdorf for professional arable farming with high pulling-power demands. Unlike Fendt's smaller ranges, which mostly run Deutz or AGCO's own Power engines, the sixth generation of the 900 series relies on a MAN six-cylinder of 9,037 cm³, supplying the litre output needed for the flagship 936, 939 and 942 Vario models; the number in the model designation orders the power class in ascending order. The stepless Vario transmission transmits power without gear steps even in Fendt's largest models, one model also approved for pure rapeseed oil fuel (RME).

Read on 3 more paragraphs

The register lists 5 versions with power recorded from 220 to 305 kW from six-cylinders of 9,037 cm³, torque from 1,218 to 1,310 Nm at 2,200 rpm and operating weights from 11,300 to 11,780 kg at a linkage lift capacity of 12,410 kg; lengths range from 5,655 to 5,890 mm.

The 900 Vario is the top of Fendt's line-up for large arable farms and contractors with heavy implements and high pulling-power demands, where it competes with the Case IH Magnum and the John Deere 8R.

On used tractors, the condition of the Vario transmission, leak-free hydraulics given the many control units, rust on cab and bonnet, the condition of front-axle suspension and tyres and parts supply for the MAN engine, run through the Fendt network, are what count.

Sources: SpecCodex register, model data: Fendt 900 Vario Gen6, Fendt (AGCO, Hersteller)

Technical data

Engine

Engine	MAN, 6 cyl.correct
Fuel	Diesel/RMEcorrect
Power	326 hp (220 kW)correct
Rated speed	2,200 rpmcorrect
Torque	1,310 Nmcorrect
Speed at max. torque	1,450 rpmcorrect
Cylinders	6correct
Bore	108 mmcorrect
Stroke	130 mmcorrect
Injection pressure	1,600 barcorrect
Cooling	water-cooledcorrect

Dimensions and weights

Length	5,655 mmcorrect
Width	2,750 mmcorrect
Height	3,322 mmcorrect
Wheelbase	3,050 mmcorrect
Ground clearance	570 mmcorrect
Unladen weight	11,300 kgcorrect

Drivetrain and chassis

Drive	four-wheel drivecorrect
Gearbox	Vario TA300correct
Front tyres	600/65 R 34correct
Rear tyres	710/70 R 42correct
Top speed	50 km/hcorrect

Working data

Lifting capacity	12,410 kgcorrect
Fuel tank capacity	625 lcorrect
Hydraulic flow	165 l/mincorrect

Origin and approval

Construction	unit construction (no separate frame)correct

Other data

Linkage category	Cat IIIcorrect
PTO speed	540E/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 19.5 kW/t (220 kW / 11.3 t)

Power class: Heavy (> 180 hp)

Stronger than 97% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt 933 Vario have?

The Fendt 933 Vario delivers 326 hp.

How much does the Fendt 933 Vario weigh?

The unladen weight is 11,300 kg.

What engine does the Fendt 933 Vario have?

6 cylinders, Diesel/RME.

How fast does the Fendt 933 Vario go?

Top speed is 50 km/h.

How much does the rear linkage of the Fendt 933 Vario lift?

The rear linkage lifts 12,410 kg.

What are the dimensions of the Fendt 933 Vario?

5,655 mm × 2,750 mm × 3,322 mm.

When was the Fendt 933 Vario built?

Production years: 2019–2026.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 30 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →