Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › 300 Vario Gen4 › 312 Vario

Fendt 312 Vario Gen4

Built: 2015–2022 · Series: 300 Vario Gen4

More machines from model year 2015

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 300 Vario Gen4 series from Fendt includes the 312 Vario Gen4. Production: 2015–2022. The engine delivers 113 hp (91 kW), has 4 cylinders, with a displacement of 4,400 cm³. Torque is 515 Nm. The machine is 4,060 mm long and 1,980 mm wide. The unladen weight is 4,770 kg. The tank holds 210 litres. Transmission: Vario ML75. The gross vehicle weight is 8,000 kg. The linkage is category II/III. The PTO runs at 540/540E/1000 rpm. The 300 Vario Gen4 series covers 4 models and was built 2015–2022. Rated output within it ranges from 100 to 132 hp; the 312 Vario sits in the middle of that range with 113 hp. Its immediate neighbours are the 311 Vario below it with 100 hp and the 313 Vario above it with 123 hp. Unladen weight within it ranges from 4,470 to 6,350 kg; here the 312 Vario sits in the lower part of that range with 4,770 kg. 1545 Fendt models across 89 series are on record.

Fendt 300 Vario Gen4 – the fourth generation from Marktoberdorf: 311 to 314 Vario with AGCO Power four-cylinder 4,400 cm³, 84 to 112 kW, revised cab and electronics

The Fendt 300 Vario Gen4 is the fourth iteration of the compact Vario range from Marktoberdorf, replacing the previous generation with a revised cab, new operating logic and a different engine. In place of the previously fitted Deutz four-cylinder, an AGCO Power four-cylinder of 4,400 cm³, built in-house by the parent group, powers the 311 to 314 Vario models; the "Gen4" designation follows the manufacturer's internal generation count, which Fendt uses to mark update cycles of its Vario ranges. The stepless Vario transmission, the maker's hallmark since 1995, remains the namesake of the entire model range.

Read on 3 more paragraphs

The register lists here 4 versions with 84 to 112 kW, torque from 485 to 515 Nm, unladen weights from 4,470 to 6,350 kg, gross weights from 8,000 to 8,750 kg, lengths from 4,060 to 4,283 mm and widths from 1,980 to 2,550 mm.

The Gen4 iteration continues to target mixed farms, grassland work and municipal use, competing there with John Deere, Case IH, Deutz-Fahr and Massey Ferguson (also part of AGCO); the revised cab with more glass area and the updated operator interface are meant to lift operating comfort to the level of the larger Vario ranges.

On a used buy, what counts is the condition of the Vario transmission unit, the tightness of the hydraulics and front PTO, the function of the terminals and ISOBUS interface, and corrosion on the wings and cab frame; parts and software updates run through AGCO's Fendt dealer network.

Sources: SpecCodex register, model data: Fendt 300 Vario Gen4, Fendt (AGCO, Hersteller)

Technical data

Engine

EngineAGCO Power 44 AWF HD, 4 cyl.correct
Power113 hp (91 kW)correct
Torque515 Nmcorrect
Cylinders4correct
Displacement4,400 cm³correct

Dimensions and weights

Length4,060 mmcorrect
Width1,980 mmcorrect
Unladen weight4,770 kgcorrect
Gross vehicle weight8,000 kgcorrect

Drivetrain and chassis

GearboxVario ML75correct

Working data

Fuel tank capacity210 lcorrect
Fuel tank capacity210 lcorrect

Other data

Linkage categoryCat II/IIIcorrect
PTO speed540/540E/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 19.1 kW/t (91 kW / 4.8 t)

Power class: Large (100–180 hp)

Stronger than 76% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt 312 Vario have?

The Fendt 312 Vario delivers 113 hp.

How much does the Fendt 312 Vario weigh?

The unladen weight is 4,770 kg.

What is the gross vehicle weight of the Fendt 312 Vario?

8,000 kg.

What engine does the Fendt 312 Vario have?

4 cylinders, 4,400 cm³ displacement.

What are the dimensions of the Fendt 312 Vario?

4,060 mm × 1,980 mm.

When was the Fendt 312 Vario built?

Production years: 2015–2022.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: api.fendt.com (retrieved August 2026) · Traficom — Finnish vehicle register (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare