Start › Tractors › Fendt › 300 Vario Gen4 › 311 Vario

Fendt 311 Vario (84 kW) Gen4

Built: 2015–2022 · Series: 300 Vario Gen4

More machines from model year 2015

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 311 Vario Gen4 from Fendt is part of the 300 Vario Gen4 series. Production: 2015–2022. The engine delivers 100 hp (84 kW), has 4 cylinders, with a displacement of 4,400 cm³. Torque is 485 Nm. The machine is 4,150 mm long and 2,390 mm wide. The unladen weight is 4,470 kg. The tank holds 210 litres. Transmission: Vario ML75. The gross vehicle weight is 8,500 kg. The linkage is category II/III. The PTO runs at 540/540E/1000 rpm. The 300 Vario Gen4 series covers 4 models and was built 2015–2022. Rated output within it ranges from 100 to 132 hp; the 311 Vario sits at the bottom of that range with 100 hp. Its immediate neighbours are the 312 Vario above it with 113 hp. Unladen weight within it ranges from 4,470 to 6,350 kg; here the 311 Vario sits at the bottom of that range with 4,470 kg. 1545 Fendt models across 89 series are on record.

Fendt 300 Vario Gen4 – the fourth generation from Marktoberdorf: 311 to 314 Vario with AGCO Power four-cylinder 4,400 cm³, 84 to 112 kW, revised cab and electronics

The Fendt 300 Vario Gen4 is the fourth iteration of the compact Vario range from Marktoberdorf, replacing the previous generation with a revised cab, new operating logic and a different engine. In place of the previously fitted Deutz four-cylinder, an AGCO Power four-cylinder of 4,400 cm³, built in-house by the parent group, powers the 311 to 314 Vario models; the "Gen4" designation follows the manufacturer's internal generation count, which Fendt uses to mark update cycles of its Vario ranges. The stepless Vario transmission, the maker's hallmark since 1995, remains the namesake of the entire model range.

Read on 3 more paragraphs

The register lists here 4 versions with 84 to 112 kW, torque from 485 to 515 Nm, unladen weights from 4,470 to 6,350 kg, gross weights from 8,000 to 8,750 kg, lengths from 4,060 to 4,283 mm and widths from 1,980 to 2,550 mm.

The Gen4 iteration continues to target mixed farms, grassland work and municipal use, competing there with John Deere, Case IH, Deutz-Fahr and Massey Ferguson (also part of AGCO); the revised cab with more glass area and the updated operator interface are meant to lift operating comfort to the level of the larger Vario ranges.

On a used buy, what counts is the condition of the Vario transmission unit, the tightness of the hydraulics and front PTO, the function of the terminals and ISOBUS interface, and corrosion on the wings and cab frame; parts and software updates run through AGCO's Fendt dealer network.

Sources: SpecCodex register, model data: Fendt 300 Vario Gen4, Fendt (AGCO, Hersteller)

Technical data

Engine

Engine	AGCO Power 44 AWF HD, 4 cyl.correct
Power	100 hp (84 kW)correct
Torque	485 Nmcorrect
Cylinders	4correct
Displacement	4,400 cm³correct

Dimensions and weights

Length	4,150 mmcorrect
Width	2,390 mmcorrect
Unladen weight	4,470 kgcorrect
Gross vehicle weight	8,500 kgcorrect

Drivetrain and chassis

Gearbox	Vario ML75correct

Working data

Fuel tank capacity	210 lcorrect
Fuel tank capacity	210 lcorrect
Hydraulic flow	110 l/mincorrect

Other data

Linkage category	Cat II/IIIcorrect
PTO speed	540/540E/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 18.8 kW/t (84 kW / 4.5 t)

Power class: Universal (40–100 hp)

Stronger than 72% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt 311 Vario have?

The Fendt 311 Vario delivers 100 hp.

How much does the Fendt 311 Vario weigh?

The unladen weight is 4,470 kg.

What is the gross vehicle weight of the Fendt 311 Vario?

8,500 kg.

What engine does the Fendt 311 Vario have?

4 cylinders, 4,400 cm³ displacement.

What are the dimensions of the Fendt 311 Vario?

4,150 mm × 2,390 mm.

When was the Fendt 311 Vario built?

Production years: 2015–2022.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
1 current listings for Fendt 311 Vario on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: api.fendt.com (retrieved August 2026) · Traficom — Finnish vehicle register (retrieved August 2026) · Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.