Start › Tractors › Deutz › INTRAC 2003

Deutz INTRAC 2003

Built: 1974–1979 · Series: INTRAC

More machines from model year 1974

Source: https://www.agrarheute.com/technik/deutz-fahr-intrac-2003-a-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Deutz INTRAC 2003 belongs to the INTRAC series. Production: 1974–1979. The engine delivers 60 hp (43.9 kW), has 4 cylinders, with a displacement of 3,768 cm³. Torque is 215 Nm. Rated speed is 2,300 rpm. The machine is 3,500 mm long, 1,890 mm wide and 2,500 mm high. The unladen weight is 2,830 kg. The wheelbase measures 2,150 mm. Ground clearance is 455 mm. Top speed is 25 km/h. The tank holds 85 litres. The engine is air-cooled. Tyres: front 7.50-16 ASF (A: 10.5-18 MPT), rear 14,9-28 AS. The fuel is diesel. Construction: semi-frame construction. The linkage is category I/II. The PTO runs at 540 rpm. Around 2.301 units were built. The INTRAC series covers 5 models. Rated output within it ranges from 51 to 140 hp; the INTRAC 2003 sits at the bottom of that range with 60 hp. Its immediate neighbours are the INTRAC 2002 below it with 51 hp and the INTRAC 2005 above it with 80 hp. Unladen weight within it ranges from 2,680 to 4,980 kg; here the INTRAC 2003 sits at the bottom of that range with 2,830 kg. 189 Deutz models across 25 series are on record.

Deutz INTRAC 2002 to 2007 – the toolcarrier with a central driving position: symmetrical axle load for front and rear implements at once, three to six cylinders, 37 to 103 kW, 2.68 to 4.98 t

The INTRAC is Deutz's own answer to the self-propelled toolcarrier: unlike a normal tractor, the engine sits centrally in the frame and the driver in a raised, central cab, so the axle load is almost evenly distributed and the machine can carry equally heavy implements front and rear – for instance a sprayer boom at the front and a cultivator at the back in one pass, as required in viticulture, hop-growing and vegetable production, where high ground clearance and low soil pressure matter. The type logic of the 2000 range (INTRAC 2002 to 2007) orders the models in ascending power class, from the small three-cylinders to the large six-cylinders for professional special-crop use.

Read on 3 more paragraphs

The register lists 5 versions with 37.3 to 102.5 kW from engines of 2,826 to 6,128 cm³ at 2,300 to 2,500 rpm and operating weights from 2,680 to 4,980 kg; lengths range from 3,500 to 4,900 mm, widths from 1,890 to 2,200 mm.

The INTRAC remained a niche alongside Deutz's, and later Deutz-Fahr's, classic tractor line-up, but found loyal buyers in special-crop farming and municipal use with front and rear attachments, before the range ended in the 1990s.

On used machines, the condition of the central cab mounting, leak-free hydraulics for front and rear implements, rust on the frame, the condition of clutch and gearbox and parts supply, markedly tighter today than for the ordinary tractor line-up owing to the small production numbers, are what count.

Sources: SpecCodex register, model data: Deutz INTRAC, Deutz-Fahr (Nachfolgemarke)

Technical data

Engine

Fuel	dieselcorrect
Power	60 hp (43.9 kW)correct
Rated speed	2,300 rpmcorrect
Torque	215 Nmcorrect
Cylinders	4correct
Displacement	3,768 cm³correct
Cooling	air-cooledcorrect

Dimensions and weights

Length	3,500 mmcorrect
Width	1,890 mmcorrect
Height	2,500 mmcorrect
Wheelbase	2,150 mmcorrect
Ground clearance	455 mmcorrect
Unladen weight	2,830 kgcorrect

Drivetrain and chassis

Drive	rear- or four-wheel drivecorrect
Gearbox	8/2- oder 12/4-Getriebecorrect
Front tyres	7.50-16 ASF (A: 10.5-18 MPT)correct
Rear tyres	14, 9-28 AScorrect
Top speed	25 km/hcorrect

Working data

Fuel tank capacity	85 lcorrect

Origin and approval

Construction	semi-frame constructioncorrect
Units built	2,301correct

Other data

Linkage category	Cat I/IIcorrect
PTO speed	540 rpmcorrect

Where this model stands

Power-to-weight ratio: 15.5 kW/t (44 kW / 2.8 t)

Power class: Universal (40–100 hp)

Stronger than 41% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Deutz INTRAC 2003 have?

The Deutz INTRAC 2003 delivers 60 hp.

How much does the Deutz INTRAC 2003 weigh?

The unladen weight is 2,830 kg.

What engine does the Deutz INTRAC 2003 have?

4 cylinders, 3,768 cm³ displacement, Diesel.

How fast does the Deutz INTRAC 2003 go?

Top speed is 25 km/h.

What are the dimensions of the Deutz INTRAC 2003?

3,500 mm × 1,890 mm × 2,500 mm.

When was the Deutz INTRAC 2003 built?

Production years: 1974–1979.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →