Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Deutz-Fahr › Other models › AGROXTRA

Deutz-Fahr AGROXTRA

Built: 1995 · Series: Other models

More machines from model year 1995

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Deutz-Fahr AGROXTRA is a machine built by Deutz-Fahr. Production: 1995. The engine delivers 63 kW, has 4 cylinders, with a displacement of 4,086 cm³. The machine is 4,030 mm long and 2,240 mm wide. The unladen weight is 3,800 kg. The gross vehicle weight is 4,500 kg. Rated output across the Deutz-Fahr range ranges from 21 to 273 kW; the AGROXTRA sits in the lower part of that range with 63 kW. Its immediate neighbours are the AGROPLUS S 410 below it with 62.5 kW and the AGROPLUS 87 above it with 64 kW. Unladen weight across the Deutz-Fahr range ranges from 1,250 to 10,725 kg; here the AGROXTRA sits in the lower part of that range with 3,800 kg. 692 Deutz-Fahr models across 50 series are on record.

Deutz-Fahr – other models: the collective page of tractors outside the named ranges, from the MK3-generation classics through the 4 and 5 series to models with KEYLINE and TTV specification

This page gathers the Deutz-Fahr tractors the register could not assign to a named range – from older model years such as the 100 to 260 MK3 range through the four-cylinder 4 series (4.5, 4.56, 4.85, 4006) to the broad mid-range 5 series with types from 5060 to 5120. Deutz, founded in 1864 by Nikolaus Otto in Cologne as an engine works, merged its tractor business with that of the Fahr machinery works of Gottmadingen in 1968 to form Deutz-Fahr; since 1995 the brand has belonged to the Italian SAME-Deutz-Fahr group (SDF), which builds the tractors in Lauingen on the Danube in Bavaria. In the 5 series the type designation clearly tracks the power: the 5090 has about 90 hp, the 5105 about 105 hp, the 5115 about 115 hp; the suffixes KEYLINE, ECOLINE and TTV denote the equipment level and stepless transmission, D and DT four-wheel drive.

Read on 3 more paragraphs

The register lists here 213 versions with 35 to 211.1 kW (47 to 268 hp) from three- to six-cylinders of 1,758 to 7,146 cm³, unladen weights from 2,800 to 10,725 kg, gross weights from 4,500 to 16,000 kg, lengths from 2,980 to 5,820 mm, widths from 2,008 to 2,944 mm and heights from 2,020 to 3,225 mm.

Deutz-Fahr is one of Europe's longest-established tractor brands and a fixture in the mid and upper power segment in Germany, Italy and much of southern Europe; the brand's distinctive green paint and cab design have shaped its image for decades.

On used tractors, engine condition and rust on the bodywork count on the older MK3 and 4-series models, on the 5 series the transmission (mechanical, KEYLINE or stepless TTV), hydraulics and electronics, and on the DF and G variants the condition of the four-wheel-drive clutch; parts run through the SDF network and in part through Same and Lamborghini workshops.

Sources: SpecCodex register, model data: Deutz-Fahr (weitere Modelle), Deutz-Fahr (SDF, Hersteller)

Technical data

Engine

Power63 kWcorrect
Cylinders4correct
Displacement4,086 cm³correct

Dimensions and weights

Length4,030 mmcorrect
Width2,240 mmcorrect
Unladen weight3,800 kgcorrect
Gross vehicle weight4,500 kgcorrect

Where this model stands

Power-to-weight ratio: 16.6 kW/t (63 kW / 3.8 t)

Power class: Universal (40–100 hp)

Stronger than 58% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Deutz-Fahr AGROXTRA have?

The Deutz-Fahr AGROXTRA delivers 63 kW.

How much does the Deutz-Fahr AGROXTRA weigh?

The unladen weight is 3,800 kg.

What is the gross vehicle weight of the Deutz-Fahr AGROXTRA?

4,500 kg.

What engine does the Deutz-Fahr AGROXTRA have?

4 cylinders, 4,086 cm³ displacement.

What are the dimensions of the Deutz-Fahr AGROXTRA?

4,030 mm × 2,240 mm.

When was the Deutz-Fahr AGROXTRA built?

Production years: 1995.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare