Deutz-Fahr AgroPrima 6.06
Built: 1991–1995 · Series: AgroPrima
More machines from model year 1991
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Deutz-Fahr AgroPrima 4.31 to 6.16 – SDF's entry range with four- and six-cylinders: first digit as cylinder count, second as upgrade level, 55 to 81 kW, 3.53 to 4.45 t
AgroPrima, like Agrofarm, is a simple entry range from Deutz-Fahr within the Italian SDF group (Same Deutz-Fahr), designed for price-conscious farms and export markets. The naming logic follows the usual SDF pattern: the first digit gives the engine's cylinder count – 4 for the four-cylinder AgroPrima 4.31, 4.51 and 4.56, 6 for the six-cylinder AgroPrima 6.06 and 6.16 – the second digit orders the range by version and power. The four-cylinders deliver less power than the six-cylinders, as shown by the displacement span from just over 4 to just over 6 litres; fitted are water-cooled Deutz-Fahr diesels with mechanical or part-synchronised gearboxes typical of the simple entry class.
Read on 3 more paragraphs
The register lists 5 versions with 54.9 to 81 kW from four- and six-cylinders of 4,086 to 6,128 cm³, torque from 260 to 387 Nm at 2,300 to 2,400 rpm and operating weights from 3,530 to 4,450 kg; lengths range from 4,032 to 4,530 mm.
AgroPrima, like Agrofarm, represents the simple, mechanically oriented side of the SDF line-up and is sold chiefly outside western Europe, where ruggedness and low repair costs matter more than comfort and electronics.
On used tractors, the condition of clutch and gearbox, leak-free hydraulics, rust on body panels, the condition of the front axle on four-wheel-drive versions and parts supply through the SDF network, built out to varying degrees by region, are what count.
Sources: SpecCodex register, model data: Deutz-Fahr AgroPrima, Deutz-Fahr (Hersteller, SDF-Gruppe)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 100 hp (74 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 369 Nmcorrect |
| Speed at max. torque | 1,600 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 5,652 cm³correct |
| Bore | 100 mmcorrect |
| Stroke | 120 mmcorrect |
| Injection pressure | 175 barcorrect |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 4,530 mmcorrect |
|---|---|
| Width | 2,085 mmcorrect |
| Height | 2,735 mmcorrect |
| Wheelbase | 2,718 mmcorrect |
| Ground clearance | 505 mmcorrect |
| Unladen weight | 4,450 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 15V / 5R or 18V / 6Rcorrect |
| Front tyres | 16.9 R24 AScorrect |
| Rear tyres | 18.4 R38 AScorrect |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 132 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 16.6 kW/t (74 kW / 4.5 t)
Power class: Universal (40–100 hp)
Stronger than 66% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Deutz-Fahr AgroPrima 6.06 have?
The Deutz-Fahr AgroPrima 6.06 delivers 100 hp.
How much does the Deutz-Fahr AgroPrima 6.06 weigh?
The unladen weight is 4,450 kg.
What engine does the Deutz-Fahr AgroPrima 6.06 have?
6 cylinders, 5,652 cm³ displacement, Diesel.
How fast does the Deutz-Fahr AgroPrima 6.06 go?
Top speed is 30 km/h.
What are the dimensions of the Deutz-Fahr AgroPrima 6.06?
4,530 mm × 2,085 mm × 2,735 mm.
When was the Deutz-Fahr AgroPrima 6.06 built?
Production years: 1991–1995.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 28 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
