Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Daimler › VITO 109 CDI

Daimler VITO 109 CDI

Built: 2010 · Series: Other models

More machines from model year 2010

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Daimler VITO 109 CDI is a machine built by Daimler. Production: 2010. The engine has 4 cylinders, with a displacement of 2,148 cm³. The machine is 1,900 mm wide. The unladen weight is 2,092 kg. The wheelbase measures 3,200 mm. Top speed is 156 km/h. The gross vehicle weight is 2,770 kg. The machine runs on 4 wheels. Unladen weight across the Daimler range ranges from 1,482 to 15,476 kg; the VITO 109 CDI sits at the bottom of that range with 2,092 kg. Its immediate neighbours are the VITO below it with 1,965 kg and the DODGE RAM 1500 above it with 2,220 kg. Gross vehicle weight across the Daimler range ranges from 2,085 to 26,000 kg; here the VITO 109 CDI sits at the bottom of that range with 2,770 kg. 44 Daimler models across 6 series are on record.

Daimler – other models: the collective page of vans and light commercial vehicles outside named ranges, from the Mercedes-Benz Vito and Sprinter to the Dodge Ram of the DaimlerChrysler era, 2.1 to 5.9 litres

This page gathers vans and light commercial vehicles that the register carries under the group name Daimler but could not assign to a narrower individual range – and it shows how many different companies have carried the name Daimler. The span reaches from the Mercedes-Benz Vito ranges W638, 639 and 447 through the current Sprinter of the 907 range and the Dodge Ram from the merger era of Daimler-Benz and Chrysler into DaimlerChrysler (1998 to 2007) to the Dingo, the light reconnaissance vehicle of the British Daimler Company, which despite shared roots in Gottlieb Daimler was an independent company and built this scout car during the Second World War for the British Army. On the Vito and Sprinter, the CDI figure follows the Mercedes scheme and gives the engine power in hp divided by ten; on the Dodge Ram, the numbers 1500 and 3500 stand for the American payload classes of half-ton and one-ton.

Read on 3 more paragraphs

The register lists here 12 versions with four- to eight-cylinders of 2,143 to 5,898 cm³, unladen weights from 1,482 to 3,160 kg, gross weights from 2,085 to 3,500 kg and widths from 1,580 to 2,390 mm.

The grouping under the name Daimler shows how varied a corporate history can be behind a single brand name: European vans for trades and businesses alongside North American pick-ups from the DaimlerChrysler era.

On the Mercedes vans, rust on the load floor and sills and the condition of the turbocharger and dual-mass flywheel count; on the Dodge Ram, frame corrosion, axles and the condition of the large-displacement V8; parts for the Mercedes models run through the Mercedes-Benz Vans network, for the Ram through specialist importers of American cars.

Sources: SpecCodex register, model data: Daimler (weitere Modelle), Mercedes-Benz Group (Daimler-Nachfolgeunternehmen)

Technical data

Engine

Cylinders4correct
Displacement2,148 cm³correct

Dimensions and weights

Width1,900 mmcorrect
Wheelbase3,200 mmcorrect
Unladen weight2,092 kgcorrect
Gross vehicle weight2,770 kgcorrect

Drivetrain and chassis

Wheels4correct
Top speed156 km/hcorrect

Frequently asked questions

How much does the Daimler VITO 109 CDI weigh?

The unladen weight is 2,092 kg.

What is the gross vehicle weight of the Daimler VITO 109 CDI?

2,770 kg.

What engine does the Daimler VITO 109 CDI have?

4 cylinders, 2,148 cm³ displacement.

When was the Daimler VITO 109 CDI built?

Production years: 2010.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare