Cockshutt 30
Built: 1946-1957 · Series: Other models
The Cockshutt 30 rolled off the line in 1946-1957 as a tractor. It is powered by a four-cylinder engine producing 21 kW.
It runs on petrol; the engine is water-cooled. Within the range, rated power spans from 18 to 123 kW; with 21 kW, the 30 sits at the bottom end. Directly alongside are the Hart-Parr 18-24 with 18 kW below and the 20 with 22 kW above.
Technical data
Engine
| Engine make | Budacorrect |
|---|---|
| Fuel | petrolcorrect |
| Power | 28 hp (21 kW)correct |
| Cylinders | 4correct |
| Displacement | 153.1 cicorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Working data
| Fuel tank capacity | 15 galcorrect |
|---|
Origin and approval
| Plant | Brantford, Ontario, Canadacorrect |
|---|
Frequently asked questions
How much power does the Cockshutt 30 have?
The Cockshutt 30 delivers 28 hp.
What engine does the Cockshutt 30 have?
4 cylinders, gasoline.
When was the Cockshutt 30 built?
Production years: 1946-1957.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.