Cockshutt 1550
Built: 1965-1969 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Cockshutt 1550 is a tractor built in 1965-1969. It is powered by a six-cylinder engine producing 40 kW.
It runs on petrol or diesel; the engine is water-cooled. Within the range, rated power spans from 18 to 123 kW; with 40 kW, the 1550 sits in the mid-field. Directly alongside are the 770 with 35 kW below and the 1365 with 41 kW above.
Technical data
Engine
| Engine make | Olivercorrect |
|---|---|
| Fuel | petrol; dieselcorrect |
| Power | 53 hp (40 kW)correct |
| Cylinders | 6correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Width | 99.25 in (2520,9 mm)correct |
|---|---|
| Unladen weight | 7, 000 to 8, 730correct |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Working data
| PTO speed | 540 / 1000correct |
|---|
Origin and approval
| Plant | Charles City, Iowa, USAcorrect |
|---|
Frequently asked questions
How much power does the Cockshutt 1550 have?
The Cockshutt 1550 delivers 53 hp.
What engine does the Cockshutt 1550 have?
6 cylinders, gasoline ; diesel.
When was the Cockshutt 1550 built?
Production years: 1965-1969.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.