Cockshutt 1250
Built: 1965-1965 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Cockshutt 1250 rolled off the line in 1965 as a tractor. The four-cylinder engine produces 28.7 kW.
It runs on petrol; the engine is water-cooled. It was replaced by the Cockshutt 1250-A. Within the range, rated power spans from 18 to 123 kW; with 28.7 kW, the 1250 sits in the lower third. Directly alongside are the 540 with 23 kW below and the 1255 with 29 kW above.
Technical data
Engine
| Engine make | Fiatcorrect |
|---|---|
| Fuel | petrolcorrect |
| Power | 38.5 hp (28.7 kW)correct |
| Cylinders | 4correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Working data
| PTO speed | 540correct |
|---|
Origin and approval
| Plant | Italycorrect |
|---|---|
| Successor | Cockshutt 1250-Acorrect |
Frequently asked questions
How much power does the Cockshutt 1250 have?
The Cockshutt 1250 delivers 38.5 hp.
What engine does the Cockshutt 1250 have?
4 cylinders, gasoline.
When was the Cockshutt 1250 built?
Production years: 1965.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.