Cockshutt 1350
Built: 1966-1968 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Cockshutt 1350 is a tractor built in 1966-1968. It is powered by a four-cylinder engine producing 33 kW.
It runs on petrol, diesel or LP; the engine is water-cooled. Within the range, rated power spans from 18 to 123 kW; with 33 kW, the 1350 sits in the mid-field. Directly alongside are the Black Hawk 35 with 32 kW below and the 770 with 35 kW above.
Technical data
Engine
| Engine make | Minneapolis-Molinecorrect |
|---|---|
| Fuel | petrol; diesel; LPcorrect |
| Power | 44 hp (33 kW)correct |
| Cylinders | 4correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Unladen weight | 3, 630 to 3, 830 lbscorrect |
|---|
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Working data
| PTO speed | 540correct |
|---|---|
| Linkage category | Cat IIcorrect |
Origin and approval
| Plant | Minneapolis, Minnesota, USAcorrect |
|---|
Frequently asked questions
How much power does the Cockshutt 1350 have?
The Cockshutt 1350 delivers 44 hp.
What engine does the Cockshutt 1350 have?
4 cylinders, gasoline ; diesel ; LP.
When was the Cockshutt 1350 built?
Production years: 1966-1968.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.