StartTractorsCLAAS › Arion 610 C

CLAAS Arion 610 C 4WD

Series: ARION

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the CLAAS Arion 610 C belongs to the Claas 4WD Tractor series. 125 hp (85 kW) is what the six-cylinder engine gets out of 6.8 litres. Rated output is reached at 2,200 rpm, so it works in the lower rev range.

Top speed is 40 km/h. Unladen weight is 6,304 kg.

Within the range, rated power spans from 74.1 to 517 hp; with 125 hp, the Arion 610 C sits in the mid-field. Directly alongside are the Arion 520 with 122 hp below and the Arion 530 with 128 hp above.

Technical data

Engine

Engine modelECE R 24correct
Power125.1 hp (85 kW)correct
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,789.2 cm³correct

Dimensions and weights

Ground clearance508correct
Unladen weight6,304 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmission speeds 4correct
Forward gears16correct
Reverse gears16correct
Tyre sizeFront 13.6 R 28, Rear 16.9R38correct
Top speed40.1 km/hcorrect

Working data

Pump flow60.2 l/mincorrect
Hydraulic pressure200correct
Fuel tank capacity280.1 lcorrect

Other data

Height3,057.1correct

Where this model stands

Power-to-weight ratio: 13.5 kW/t (85 kW / 6.3 t)

Power class: Large (100–180 hp)

Stronger than 74% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Arion 610 C have?

The CLAAS Arion 610 C delivers 125 hp.

How much does the CLAAS Arion 610 C weigh?

The unladen weight is 6,304 kg.

What engine does the CLAAS Arion 610 C have?

6 cylinders, 6,789 cm³ displacement.

How fast does the CLAAS Arion 610 C go?

Top speed is 40.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare