Citroën AMI 8 SERVICE
Built: 1977 · Series: AMI
More machines from model year 1977
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Citroën Ami – a small car as a van: Break and Service versions of the Ami 6, 8 and Super, flat-twin engine from 602 cc, gross weights from 910 to 1,185 kg
The Citroën Ami was introduced in 1961 as the Ami 6, based on the 2CV, and replaced in 1969 by the Ami 8 with reworked bodywork; Break denotes the estate version, Service the more simply equipped van version without a rear bench seat for light goods transport. The air-cooled flat-twin engine of the Ami 6 and Ami 8 came in different displacements across versions; the Ami Super, introduced in 1972, took over the flat-four engine from the Citroën GS.
Read on 4 more paragraphs
The register lists 6 versions from two- and four-cylinder engines from 602 cc. Kerb weights range from 580 to 935 kg, gross vehicle weights from 910 to 1,185 kg. Widths run from 1,470 to 1,560 mm.
As the van variant of the Ami, the Break/Service served the segment of small, economical utility vehicles alongside the Citroën 2CV Fourgonnette, and in France stood for inexpensive goods transport over short distances, for example for tradespeople and retail.
Like the Vanclee micro-vans, the Ami's low gross weight sat far below anything today's EU class N1 with its 3.5-tonne ceiling actually regulates; an ordinary car licence was enough to drive it. Because every engine variant is air-cooled, there is no water pump, radiator or antifreeze to fail, but the absence of coolant-based temperature control means the valve clearances need regular manual adjustment instead.
On a used example, checks should cover corrosion on the floor pan, sills and wheel arches, the condition of the front trailing-arm suspension and its rubber elements, the sealing and condition of the air-cooled flat engine, and the function of the drum brakes; spare parts are available through specialist Citroën classic-car dealers and clubs.
Sources: SpecCodex register, model data: Citroën Ami
Technical data
Engine
| Cylinders | 2correct |
|---|---|
| Displacement | 602 cm³correct |
Dimensions and weights
| Width | 1,480 mmcorrect |
|---|---|
| Wheelbase | 2,400 mmcorrect |
| Unladen weight | 705 kgcorrect |
| Gross vehicle weight | 1,100 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Citroën AMI 8 SERVICE weigh?
The unladen weight is 705 kg.
What is the gross vehicle weight of the Citroën AMI 8 SERVICE?
1,100 kg.
What engine does the Citroën AMI 8 SERVICE have?
2 cylinders, 602 cm³ displacement.
When was the Citroën AMI 8 SERVICE built?
Production years: 1977.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
