Challenger MT975C
Built: 2011-2011 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Challenger MT975C is a tractor built in 2011. Engine output is 436 kW.
The fuel specified is diesel. The predecessor was the Challenger MT975B. Within the range, rated power spans from 16.8 to 470 kW; with 436 kW, the MT975C sits at the top. Directly alongside are the MT975B with 430 kW below and the MT875C with 470 kW above.
Technical data
Engine
| Engine make | Caterpillarcorrect |
|---|---|
| Engine model | C18correct |
| Fuel | dieselcorrect |
| Power | 585 hp (436 kW)correct |
| Naturally aspirated | naturally aspiratedcorrect |
Drivetrain and chassis
| Drive | four-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | Jackson, Minnesota, USAcorrect |
|---|---|
| Predecessor | Challenger MT975Bcorrect |
Frequently asked questions
How much power does the Challenger MT975C have?
The Challenger MT975C delivers 585 hp.
When was the Challenger MT975C built?
Production years: 2011.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.