Challenger MT225 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Challenger MT225 is a tractor from the Challenger 4WD Tractor series. Power comes from a three-cylinder engine; from 1.1 litres it draws 24 hp (17.4 kW). Rated output is reached at 2,800 rpm, so it works in the lower rev range.
Unladen weight is 720 kg.
Within the range, rated power spans from 22.8 to 593 hp; with 23.6 hp, the MT225 sits at the bottom end. Directly alongside are the MT225B with 22.8 hp below and the MT255 with 28.8 hp above.
Technical data
Engine
| Power | 23.6 hp (17.4 kW)correct |
|---|---|
| Rated speed | 2,800 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,122.5 cm³correct |
| Aspiration | Naturalcorrect |
Dimensions and weights
| Unladen weight | 720.3 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | hydrostatic transmission - 2 rangecorrect |
|---|---|
| Tyre size | Front 23x8.50 - 12 Rear 12-16.5correct |
Working data
| Pump flow | 29.9 l/mincorrect |
|---|---|
| Hydraulic pressure | 133.1correct |
| Fuel tank capacity | 22.7 lcorrect |
Other data
| Height | 1,911.1correct |
|---|
Where this model stands
Power-to-weight ratio: 24.2 kW/t (17 kW / 0.7 t)
Power class: Compact (< 40 hp)
Stronger than 11% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Challenger MT225 have?
The Challenger MT225 delivers 23.6 hp.
How much does the Challenger MT225 weigh?
The unladen weight is 720 kg.
What engine does the Challenger MT225 have?
3 cylinders, 1,122 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.