Challenger MT255 (21.2 kW) 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Challenger MT255 is a tractor from the Challenger 4WD Tractor series. The three-cylinder engine, displacing 1.5 litres, produces 29 hp (21.2 kW). Rated power arrives at 2,500 rpm — the engine pulls from low down rather than needing to be revved.
Unladen, it tips the scales at 957 kg.
Within the range, rated power spans from 22.8 to 593 hp; with 28.8 hp, the MT255 sits at the bottom end. Directly alongside are the MT225 with 23.6 hp below and the MT265 with 33.5 hp above.
Technical data
Engine
| Power | 28.8 hp (21.2 kW)correct |
|---|---|
| Rated speed | 2,500 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,463.4 cm³correct |
| Aspiration | Naturalcorrect |
Dimensions and weights
| Length | 2,960 mmcorrect |
|---|---|
| Unladen weight | 956.6 kgcorrect |
Drivetrain and chassis
| Gearbox type | constant-mesh gearboxcorrect |
|---|---|
| Forward gears | 9correct |
| Reverse gears | 3correct |
| Tyre size | Front 25x8.50 - 14 Rear 12.5/80-18correct |
Working data
| Lifting capacity | 600 kgcorrect |
|---|---|
| Pump flow | 37.5 l/mincorrect |
| Hydraulic pressure | 146.9correct |
| Fuel tank capacity | 22.7 lcorrect |
| PTO output | 24 hpcorrect |
Other data
| Cab height | 2,014.7correct |
|---|
Where this model stands
Power-to-weight ratio: 22.2 kW/t (21 kW / 1 t)
Power class: Compact (< 40 hp)
Stronger than 17% of the tractors in the register — out of 14,914 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Challenger MT255 have?
The Challenger MT255 delivers 28.8 hp.
How much does the Challenger MT255 weigh?
The unladen weight is 957 kg.
What engine does the Challenger MT255 have?
3 cylinders, 1,463 cm³ displacement.
What is the PTO output of the Challenger MT255?
PTO output is 24 hp.
How much does the rear linkage of the Challenger MT255 lift?
The rear linkage lifts 600 kg.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.