Challenger MT225B 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Challenger MT225B belongs to the Challenger 4WD Tractor series. 23 hp (16.8 kW) is what the three-cylinder engine gets out of 1.1 litres. With a rated speed of 2,600 rpm, it is built for pulling power, not for revving.
At 22 km/h, that is as fast as it goes. Empty, it weighs 728 kg.
Within the range, rated power spans from 22.8 to 593 hp; with 22.8 hp, the MT225B sits at the bottom end. The next one up is the MT225 with 23.6 hp.
Technical data
Engine
| Power | 22.8 hp (16.8 kW)correct |
|---|---|
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,122.5 cm³correct |
| Aspiration | Naturalcorrect |
Dimensions and weights
| Ground clearance | 265.2correct |
|---|---|
| Unladen weight | 727.6 kgcorrect |
Drivetrain and chassis
| Gearbox type | hydrostatic transmission (HST)correct |
|---|---|
| Forward gears | 2correct |
| Tyre size | (F)6-12 4ply; (R)9.5-16 6plycorrect |
| Top speed | 21.7 km/hcorrect |
Working data
| Pump flow | 30.7 l/mincorrect |
|---|---|
| Hydraulic pressure | 137.2correct |
| Fuel tank capacity | 25.4 lcorrect |
Other data
| Height | 1,956.8correct |
|---|
Where this model stands
Power-to-weight ratio: 23.1 kW/t (17 kW / 0.7 t)
Power class: Compact (< 40 hp)
Stronger than 10% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Challenger MT225B have?
The Challenger MT225B delivers 22.8 hp.
How much does the Challenger MT225B weigh?
The unladen weight is 728 kg.
What engine does the Challenger MT225B have?
3 cylinders, 1,122 cm³ displacement.
How fast does the Challenger MT225B go?
Top speed is 21.7 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.