StartTractorsChallenger › MT855C

Challenger MT855C

Built: 2009-2009 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Challenger MT855C rolled off the line in 2009 as a tractor. 354 kW is available.

Propulsion comes from track.

It is powered by diesel. The predecessor was the Challenger MT855B. Within the range, rated power spans from 16.8 to 470 kW; with 354 kW, the MT855C sits at the top. Directly alongside are the MT955B with 343 kW below and the MT965B with 380 kW above.

Technical data

Engine

Engine makeCaterpillarcorrect
Fueldieselcorrect
Power475 hp (354 kW)correct
Naturally aspiratednaturally aspiratedcorrect

Drivetrain and chassis

Drivetracked undercarriagecorrect

Origin and approval

PlantDeKalb, Illinois, USA; Jackson, MN, USAcorrect
PredecessorChallenger MT855Bcorrect

Other data

Main articleChallengercorrect

Frequently asked questions

How much power does the Challenger MT855C have?

The Challenger MT855C delivers 475 hp.

When was the Challenger MT855C built?

Production years: 2009.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare