Challenger MT525B
Built: 2004-2004 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Challenger MT525B rolled off the line in 2004 as a tractor. The engine produces 71 kW.
Propulsion comes from MFWD.
It runs on diesel. It was replaced by the Challenger MT525D. Within the range, rated power spans from 18 to 436 kW; with 71 kW, the MT525B sits in the lower third. Directly alongside are the MT465B with 67 kW below and the MT464 with 78 kW above.
Technical data
Engine
| Engine make | Caterpillar; Challenger Endurance (Europe)correct |
|---|---|
| Fuel | dieselcorrect |
| Power | 95 hp (71 kW)correct |
| Naturally aspirated | naturally aspiratedcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Beauvois, Francecorrect |
|---|---|
| Successor | Challenger MT525Dcorrect |
Other data
| Main article | Challengercorrect |
|---|
Frequently asked questions
How much power does the Challenger MT525B have?
The Challenger MT525B delivers 95 hp.
When was the Challenger MT525B built?
Production years: 2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.