StartTractorsCase IH › STEIGER 470 WHEELED (2018-PRESENT)

Case IH STEIGER 470 WHEELED (2018-PRESENT) 4WD

Series: STEIGER

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case IH STEIGER 470 WHEELED (2018-PRESENT) is a tractor from the Case IH 4WD Tractor series. Fitted is a six-cylinder engine displacing 12.9 litres. Width is 3.05 m. Wheelbase is 3.76 m.

Technical data

Engine

Engine makeCase IH FPTcorrect
Engine modelSteiger 470 Wheeledcorrect
Cylinders6correct
Displacement12,901.5 cm³correct
AspirationWastegate Turbocharged, Aftercooledcorrect

Dimensions and weights

Width3,048correct
Wheelbase3,761.2correct

Drivetrain and chassis

Gearbox typeFull powershift transmissioncorrect
Forward gears16correct
Reverse gears2correct

Working data

Lifting capacity9,072 kgcorrect
PTO speed1,000correct

Other data

Cab height3,843correct

Frequently asked questions

What engine does the Case IH STEIGER 470 WHEELED (2018-PRESENT) have?

6 cylinders, 12,902 cm³ displacement.

How much does the rear linkage of the Case IH STEIGER 470 WHEELED (2018-PRESENT) lift?

The rear linkage lifts 9,072 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare