Technical register for agricultural, construction and commercial machinery · sourced data
StartTractorsCase IH › Steiger 530 Quadtrac

Case IH Steiger 530 Quadtrac

Built: 2007-2008 · Series: STEIGER

More machines from model year 2007

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case IH Steiger 530 Quadtrac is a tractor from the STEIGER series, built in 2007-2008. The six-cylinder engine produces 400 kW. Rated speed is 2,100 rpm.

The gearbox is a full powershift unit.

It runs on diesel; the engine is water-cooled. This model followed the Case IH Steiger Quadtrac STX530, before the Case IH Steiger 535 Quadtrac took over. Within the range, rated power spans from 260 to 450 kW; with 400 kW, the Steiger 530 Quadtrac sits in the upper third. Directly alongside are the Steiger 535 HD with 399 kW below and the Steiger 550 HD with 410 kW above.

Case IH Steiger – Large Articulated Tractor With Quadtrac Option

The Steiger series traces back to the US manufacturer Steiger Tractor, founded in 1957 and acquired by Case IH in 1986; the register lists models from 2001 to 2019. Output ranges from 260 to 450 kW, with models rated in horsepower spanning 350 to 600 hp, using six-cylinder engines.

Read on 2 more paragraphs

Besides the classic articulated wheeled version, Case IH also offers the Steiger series as the Quadtrac, with four independent rubber-tracked undercarriages, identifiable from the corresponding model designations in the register. PTO output of one recorded model is 379 hp, and lift capacity reaches up to 8,948 kg.

Within the Case IH range, the Steiger sits as the largest tractor class for operations with very high draft requirements, such as large-scale tillage in North America and Eastern Europe. For a used model, distinguishing the wheeled version from the Quadtrac matters, as maintenance demands and intended use differ considerably.

Sources: Kennwerte der Modelle Case IH Steiger

Technical data

Engine

Engine makeCumminscorrect
Engine modelQSX15correct
Fueldieselcorrect
Power530 hp (400 kW)correct
Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement912 cu incorrect
Bore5,394 incorrect
Stroke6,654 incorrect
Coolingwater-cooledcorrect

Dimensions and weights

Wheelbase154 in (3911,6 mm)correct
Turning circle18.8 ftcorrect
Unladen weight51, 000 to 52, 410 lbscorrect

Drivetrain and chassis

Drivefour-wheel driveWDcorrect
Gearboxfull powershift transmissioncorrect
Forward gears16correct
Reverse gears2correct

Working data

Lifting capacity8,948 kgcorrect
Lifting capacity19,728 lbs (8948,5 kg)correct
Fuel tank capacity300 galcorrect

Origin and approval

PlantFargo, North Dakota, USAcorrect

Other data

Linkage category4 Ncorrect
PTO speed1,000correct
PredecessorCase IH Steiger Quadtrac STX530correct
SuccessorCase IH Steiger 535 Quadtraccorrect

More machines with this engine (Cummins QSX15, 17)

Frequently asked questions

How much power does the Case IH Steiger 530 Quadtrac have?

The Case IH Steiger 530 Quadtrac delivers 530 hp.

What engine does the Case IH Steiger 530 Quadtrac have?

6 cylinders, Diesel.

How much does the rear linkage of the Case IH Steiger 530 Quadtrac lift?

The rear linkage lifts 8,948 kg.

When was the Case IH Steiger 530 Quadtrac built?

Production years: 2007-2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 29 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare