Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › MAGNUM

Case IH MAGNUM

Series: MAGNUM

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case IH (cnh) MAGNUM is a tractor made by Case IH (cnh).

Case IH Magnum 7100 and 7200 — the big six, built 1988 to 1999, 110 to 296 kW and Operating Weight from 7,525 to 13,426.3 kg

The Magnum was presented in 1987 as successor to the International 50 in the standard tractor role; series production began in 1988. The first range carried the numbers 7110, 7120, 7130 and 7140 — four large tractors, later joined by a fifth model.

Read on 4 more paragraphs

What they share is the engine: a turbocharged six-cylinder of 8.3 litres. Rated power across the range ran from 155 to 230 hp, with peak output reaching up to 246 or 264 hp at the top. The rising number therefore maps the power step, not the machine size — all models share the same base tractor.

In 1997 the 7100 range became the 7200, again with five models, the 7250 closing it at the top. The Pro designation marks the revised version. Later came the MX Magnum range, with which Case IH carried the visually ageing concept forward.

For the used market this means a 7120 and a 7220 are closely related but roughly a decade apart. Comparing two offers, do not look at the number alone but at year and version — the figure describes a position in the range, not the age of the machine.

With rated outputs of up to 296 kW, the most powerful Magnum models reached ISO 730 Category IV for the rear three-point hitch, while the smaller versions stayed within Category III; a standard dual-speed power take-off at 540 and 1,000 revolutions per minute served heavy tillage implements.

Sources: SpecCodex register, model data: Case IH Magnum 7100/7200, Case IH

Technical data

Engine

Power224 hpcorrect
Rated speed2,000 rpmcorrect
Cylinders6correct
Displacement8,268 cm³correct

Dimensions and weights

Length5,950 mmcorrect
Height3,150 mmcorrect
Wheelbase3,010 mmcorrect
Unladen weight12,900 kgcorrect

Drivetrain and chassis

Gearbox18+4correct
Forward gears18correct
Reverse gears4correct

Frequently asked questions

How much power does the Case IH MAGNUM have?

The Case IH MAGNUM delivers 224 hp.

How much does the Case IH MAGNUM weigh?

The unladen weight is 12,900 kg.

What engine does the Case IH MAGNUM have?

6 cylinders, 8,268 cm³ displacement.

What are the dimensions of the Case IH MAGNUM?

5,950 mm × 3,150 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare