Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › MAGNUM › MAGNUM 380 ROWTRAC

Case IH MAGNUM 380 ROWTRAC 4WD – specifications

Series: MAGNUM

Build year not documented · Data origin: Directory data · sources

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case IH MAGNUM 380 ROWTRac is a heavy-duty tracked agricultural tractor belonging to the Magnum series manufactured by Case IH. Positioned in the upper power range of the series, this model features all-wheel drive and a continuously variable transmission. The design is based on a six-cylinder engine from Case IH FPT with a displacement of 8,701.5 cm³, which is turbocharged via an eVGT turbocharger with intercooling.

The technical configuration with four forward gears and two reverse gears in the stepless transmission allows for precise speed adjustment to varying soil conditions and working speeds. A wheelbase of 3,151.6 mm, combined with the tracked undercarriage, ensures high stability and low ground pressure, which is advantageous when using heavy implements or in arable farming. The lifting capacity of 9,026 kg permits the use of large rear-mounted implements or heavy front weights to further optimize traction. The cab height of 3,450.1 mm provides the operator with an elevated view of the working area.

Within the Magnum series, the MAGNUM 380 ROWTRac represents the top of the available power levels. It follows the next smaller model in the series and represents the maximum available power. The ascending model number correlates directly with power output, with all models in the series based on the same basic machine. As the top model of the series, the tractor is designed for demanding field work requiring maximum drawbar pull and high working widths.

Case IH Magnum 7100 and 7200 — the big six, built 1988 to 1999, 110 to 296 kW and Operating Weight from 7,525 to 13,426.3 kg

The Magnum was presented in 1987 as successor to the International 50 in the standard tractor role; series production began in 1988. The first range carried the numbers 7110, 7120, 7130 and 7140 — four large tractors, later joined by a fifth model.

Read on 4 more paragraphs

What they share is the engine: a turbocharged six-cylinder of 8.3 litres. Rated power across the range ran from 155 to 230 hp, with peak output reaching up to 246 or 264 hp at the top. The rising number therefore maps the power step, not the machine size — all models share the same base tractor.

In 1997 the 7100 range became the 7200, again with five models, the 7250 closing it at the top. The Pro designation marks the revised version. Later came the MX Magnum range, with which Case IH carried the visually ageing concept forward.

For the used market this means a 7120 and a 7220 are closely related but roughly a decade apart. Comparing two offers, do not look at the number alone but at year and version — the figure describes a position in the range, not the age of the machine.

With rated outputs of up to 296 kW, the most powerful Magnum models reached ISO 730 Category IV for the rear three-point hitch, while the smaller versions stayed within Category III; a standard dual-speed power take-off at 540 and 1,000 revolutions per minute served heavy tillage implements.

Sources: SpecCodex register, model data: Case IH Magnum 7100/7200, Case IH

Technical data

Engine

Engine makeCase IH FPTcorrect
Engine modelMagnum 380 Rowtraccorrect
Cylinders6correct
Displacement8,701.5 cm³correct
AspirationeVGT Turbocharged, Aftercooledcorrect

Dimensions and weights

Wheelbase3,151.6 mmcorrect

Drivetrain and chassis

Gearbox typeContinuously variablecorrect
Forward gears4correct
Reverse gears2correct

Working data

Lifting capacity9,026 kgcorrect

Other data

Cab height3,450.1 mmcorrect

Frequently asked questions

What engine does the Case IH MAGNUM 380 ROWTRAC have?

6 cylinders, 8,702 cm³ displacement.

How much does the rear linkage of the Case IH MAGNUM 380 ROWTRAC lift?

The rear linkage lifts 9,026 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​‍​⁠‌⁠‌‌⁠⁠‌​‌⁠​⁠‌⁠‍‌

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare